A new take on the bleep drum using an arduino nano. The bleep drum was a rad-fi drum machine designed by Dr. Bleep.
| Designator | Footprint | Quantity | Value |
|---|---|---|---|
| SW1,SW4,SW2,SW6,SW5,SW8,SW7,SW3 | SW_PUSH-12mm | 8 | 12x12 Tactile |
| R2,R1,R6,R5 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 4 | 1K |
| R3 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 1 | 10K |
| J2 | PJ301M-12 | 1 | PJ301M-12 |
| J3,J1 | Stereo PJ301M-12 | 2 | Stereo PJ301M-12 |
| D2 | LED_D5.0mm | 1 | LED |
| RV2,RV1 | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | 2 | B100K |
| U2 | DIP-8_W7.62mm | 1 | 6N137 |
| Q1 | TO-92_Inline | 1 | 2N3904 |
| D1 | D_DO-35_SOD27_P7.62mm_Horizontal | 1 | 1N4148 |
| R4 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 1 | 220R |
| U1 | DIP-8_W7.62mm | 1 | MCP4901 |
| C1 | CP_Radial_D5.0mm_P2.50mm | 1 | 10u |
| JP1 | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | 1 | Jumper |
| A1 | Arduino_Nano | 1 | Arduino_Nano_v3.x |
Make sure to flash the Arduino first and then solder it in directly - otherwise it will be too high and the frontpanel wont fit. Make sure you have a genuine arduino nano!