Electron与串口交互示例

1.环境准备

1.1 安装Node、Npm

访问Node.js官网，选择Windows Installe，安装最新稳定版的Node.js 。以下命令检验是否安装成功

# 下面这行的命令会打印出Node.js的版本信息
node -v

# 下面这行的命令会打印出npm的版本信息
npm -v

1.2 安装cnpm

由于国内的网络环境较差，所以要使用淘宝镜像源地址，安装cnpm

npm install -g cnpm --registry=https://registry.npm.taobao.org
# 验证是否安装成功
cnpm -v
[email protected] (C:\Users\Administrator\AppData\Roaming\npm\node_modules\cnpm\lib\parse_argv.js)
[email protected] (C:\Users\Administrator\AppData\Roaming\npm\node_modules\cnpm\node_modules\npm\lib\npm.js)
[email protected] (D:\soft\node\node.exe)
[email protected] (C:\Users\Administrator\AppData\Roaming\npm\node_modules\cnpm\node_modules\npminstall\lib\index.js)
prefix=C:\Users\Administrator\AppData\Roaming\npm
win32 x64 6.1.7601
registry=https://registry.npm.taobao.org

1.3 安装Electron

用cnpm全局安装Electron

cnpm install -g electron
# 验证是否安装成功
electron -v
v9.0.5

我们采用官方提供的脚手架，快速配置项目

# 克隆这仓库
git clone https://github.com/electron/electron-quick-start
# 进入仓库
cd electron-quick-start
# 安装依赖库
cnpm install
# 运行应用
npm start

1.4 安装serialport

安装操作串口的依赖包

cnpm install serialport --save-dev

安装electron-rebuild(用来重新编译serialport包）

cnpm install --save-dev electron-rebuild
# 编译
.\node_modules\.bin\electron-rebuild.cmd

这个时候可能会编译失败，出现以下信息

× Rebuild Failed
An unhandled error occurred inside electron-rebuild
gyp info it worked if it ends with ok
gyp info using [email protected]
gyp info using [email protected] | win32 | x64
gyp info find Python using Python version 3.6.5 found at "D:\soft\python\python.exe"
gyp http GET https://www.electronjs.org/headers/v9.0.5/node-v9.0.5-headers.tar.gz
gyp http 200 https://www.electronjs.org/headers/v9.0.5/node-v9.0.5-headers.tar.gz
gyp http GET https://www.electronjs.org/headers/v9.0.5/SHASUMS256.txt
gyp http GET https://www.electronjs.org/headers/v9.0.5/win-x64/node.lib
gyp http GET https://www.electronjs.org/headers/v9.0.5/win-arm64/node.lib
gyp http GET https://www.electronjs.org/headers/v9.0.5/win-x86/node.lib
gyp http 200 https://www.electronjs.org/headers/v9.0.5/win-x86/node.lib
gyp http 200 https://www.electronjs.org/headers/v9.0.5/win-arm64/node.lib
gyp http 200 https://www.electronjs.org/headers/v9.0.5/SHASUMS256.txt
gyp http 200 https://www.electronjs.org/headers/v9.0.5/win-x64/node.lib
gyp ERR! find VS
gyp ERR! find VS msvs_version not set from command line or npm config
gyp ERR! find VS VCINSTALLDIR not set, not running in VS Command Prompt
gyp ERR! find VS could not use PowerShell to find Visual Studio 2017 or newer
gyp ERR! find VS looking for Visual Studio 2015
gyp ERR! find VS - not found
gyp ERR! find VS not looking for VS2013 as it is only supported up to Node.js 8
gyp ERR! find VS
gyp ERR! find VS **************************************************************
gyp ERR! find VS You need to install the latest version of Visual Studio
gyp ERR! find VS including the "Desktop development with C++" workload.
gyp ERR! find VS For more information consult the documentation at:
gyp ERR! find VS https://github.com/nodejs/node-gyp#on-windows
gyp ERR! find VS **************************************************************
gyp ERR! find VS
gyp ERR! configure error
gyp ERR! stack Error: Could not find any Visual Studio installation to use
gyp ERR! stack     at VisualStudioFinder.fail (E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\find-visualstudio.js:121:47)
gyp ERR! stack     at E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\find-visualstudio.js:74:16
gyp ERR! stack     at VisualStudioFinder.findVisualStudio2013 (E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\find-visualstudio.js:351:14)
gyp ERR! stack     at E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\find-visualstudio.js:70:14
gyp ERR! stack     at E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\find-visualstudio.js:372:16
gyp ERR! stack     at E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\util.js:54:7
gyp ERR! stack     at E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\util.js:33:16
gyp ERR! stack     at ChildProcess.exithandler (child_process.js:310:5)
gyp ERR! stack     at ChildProcess.emit (events.js:311:20)
gyp ERR! stack     at maybeClose (internal/child_process.js:1021:16)
gyp ERR! System Windows_NT 6.1.7601
gyp ERR! command "D:\\soft\\node\\node.exe" "E:\\code\\electron-quick-start\\node_modules\\[email protected]@node-gyp\\bin\\node-gyp.js" "rebuild" "--target=9.0.5" "--arch=x64" "--dist-url=https://www.electronjs.org/headers" "--build-from-source"
gyp ERR! cwd E:\code\electron-quick-start\node_modules\_@[email protected]@@serialport\bindings
gyp ERR! node -v v12.16.1
gyp ERR! node-gyp -v v6.1.0
gyp ERR! not ok

Failed with exit code: 1

Error: gyp info it worked if it ends with ok
gyp info using [email protected]
gyp info using [email protected] | win32 | x64
gyp info find Python using Python version 3.6.5 found at "D:\soft\python\python.exe"
gyp http GET https://www.electronjs.org/headers/v9.0.5/node-v9.0.5-headers.tar.gz
gyp http 200 https://www.electronjs.org/headers/v9.0.5/node-v9.0.5-headers.tar.gz
gyp http GET https://www.electronjs.org/headers/v9.0.5/SHASUMS256.txt
gyp http GET https://www.electronjs.org/headers/v9.0.5/win-x64/node.lib
gyp http GET https://www.electronjs.org/headers/v9.0.5/win-arm64/node.lib
gyp http GET https://www.electronjs.org/headers/v9.0.5/win-x86/node.lib
gyp http 200 https://www.electronjs.org/headers/v9.0.5/win-x86/node.lib
gyp http 200 https://www.electronjs.org/headers/v9.0.5/win-arm64/node.lib
gyp http 200 https://www.electronjs.org/headers/v9.0.5/SHASUMS256.txt
gyp http 200 https://www.electronjs.org/headers/v9.0.5/win-x64/node.lib
gyp ERR! find VS
gyp ERR! find VS msvs_version not set from command line or npm config
gyp ERR! find VS VCINSTALLDIR not set, not running in VS Command Prompt
gyp ERR! find VS could not use PowerShell to find Visual Studio 2017 or newer
gyp ERR! find VS looking for Visual Studio 2015
gyp ERR! find VS - not found
gyp ERR! find VS not looking for VS2013 as it is only supported up to Node.js 8
gyp ERR! find VS
gyp ERR! find VS **************************************************************
gyp ERR! find VS You need to install the latest version of Visual Studio
gyp ERR! find VS including the "Desktop development with C++" workload.
gyp ERR! find VS For more information consult the documentation at:
gyp ERR! find VS https://github.com/nodejs/node-gyp#on-windows
gyp ERR! find VS **************************************************************
gyp ERR! find VS
gyp ERR! configure error
gyp ERR! stack Error: Could not find any Visual Studio installation to use
gyp ERR! stack     at VisualStudioFinder.fail (E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\find-visualstudio.js:121:47)
gyp ERR! stack     at E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\find-visualstudio.js:74:16
gyp ERR! stack     at VisualStudioFinder.findVisualStudio2013 (E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\find-visualstudio.js:351:14)
gyp ERR! stack     at E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\find-visualstudio.js:70:14
gyp ERR! stack     at E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\find-visualstudio.js:372:16
gyp ERR! stack     at E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\util.js:54:7
gyp ERR! stack     at E:\code\electron-quick-start\node_modules\_[email protected]@node-gyp\lib\util.js:33:16
gyp ERR! stack     at ChildProcess.exithandler (child_process.js:310:5)
gyp ERR! stack     at ChildProcess.emit (events.js:311:20)
gyp ERR! stack     at maybeClose (internal/child_process.js:1021:16)
gyp ERR! System Windows_NT 6.1.7601
gyp ERR! command "D:\\soft\\node\\node.exe" "E:\\code\\electron-quick-start\\node_modules\\[email protected]@node-gyp\\bin\\node-gyp.js" "rebuild" "--target=9.0.5" "--arch=x64" "--dist-url=https://www.electronjs.org/headers" "--build-from-source"
gyp ERR! cwd E:\code\electron-quick-start\node_modules\_@[email protected]@@serialport\bindings
gyp ERR! node -v v12.16.1
gyp ERR! node-gyp -v v6.1.0
gyp ERR! not ok

Failed with exit code: 1
    at SafeSubscriber._error (E:\code\electron-quick-start\node_modules\_[email protected]@spawn-rx\lib\src\index.js:267:84)
    at SafeSubscriber.__tryOrUnsub (E:\code\electron-quick-start\node_modules\_[email protected]@rxjs\internal\Subscriber.js:205:16)
    at SafeSubscriber.error (E:\code\electron-quick-start\node_modules\_[email protected]@rxjs\internal\Subscriber.js:156:26)
    at Subscriber._error (E:\code\electron-quick-start\node_modules\_[email protected]@rxjs\internal\Subscriber.js:92:26)
    at Subscriber.error (E:\code\electron-quick-start\node_modules\_[email protected]@rxjs\internal\Subscriber.js:72:18)
    at MapSubscriber.Subscriber._error (E:\code\electron-quick-start\node_modules\_[email protected]@rxjs\internal\Subscriber.js:92:26)
    at MapSubscriber.Subscriber.error (E:\code\electron-quick-start\node_modules\_[email protected]@rxjs\internal\Subscriber.js:72:18)
    at SafeSubscriber._next (E:\code\electron-quick-start\node_modules\_[email protected]@spawn-rx\lib\src\index.js:242:65)
    at SafeSubscriber.__tryOrUnsub (E:\code\electron-quick-start\node_modules\_[email protected]@rxjs\internal\Subscriber.js:205:16)
    at SafeSubscriber.next (E:\code\electron-quick-start\node_modules\_[email protected]@rxjs\internal\Subscriber.js:143:22)

通过错误信息不难看出，编译需要Python依赖以及Viscual C++的构建环境用来编译serialport模块

安装gyp命令 npm install -g node-gyp （如果有可以跳过）;
安装Visual C ++构建环境(C++ 生成工具使用 Microsoft C++ 工具集、ATL 或 MFC 生成 Windows 桌面应用程序。)：Visual Studio构建工具
安装Python 2.7.3（v3.x.x不支持），安装后要配置环境变量。成功后执行npm config set python python2.7

在重新执行编译提示“Rebuild Complete”表示执行成功

.\node_modules\.bin\electron-rebuild.cmd
√ Rebuild Complete

到此我们环境配置完成

2.开始开发

2.1 目录结构

dist是打包的时候生成的
static是自己加的目录，放图片信息
main.js 是主进程的js
render.js是渲染进程的js，index.html是渲染的html文件

2.2 获取串口的信息

const SerialPort = require('serialport')

Serialport.list((err, ports) => {
    ports.forEach((port) => {
        console.log(port.comName);
    });
});

2.3 监听串口

const port = new SerialPort('COM16');
  port.on('data',function(data){
    console.log('data:'+data)
  });

2.4 在渲染进程中使用serialport

将上述代码直接在reader.js里面添加，发现报如下所示的错误

renderer.js:7 Uncaught ReferenceError: require is not defined
    at renderer.js:7

需要在main.js里面定义，渲染进程就可以使用Node的模块，所以我们在主进程main.js里面如下，设置nodeIntegration为true

 const mainWindow = new BrowserWindow({
    width: 800,
    height: 600,
    webPreferences: {
      preload: path.join(__dirname, 'preload.js'),
      nodeIntegration: true
    }
  })

重新启动后，发下控制台报一下错误

Uncaught Error: Loading non-context-aware native module in renderer: '\\?\E:\code\electron-quick-start\node_modules\_@[email protected]@@serialport\bindings\build\Release\bindings.node', but app.allowRendererProcessReuse is true. See https://github.com/electron/electron/issues/18397.
    at process.func [as dlopen] (electron/js2c/asar.js:140)
    at Object.Module._extensions..node (internal/modules/cjs/loader.js:1034)
    at Object.func [as .node] (electron/js2c/asar.js:140)
    at Module.load (internal/modules/cjs/loader.js:815)
    at Module._load (internal/modules/cjs/loader.js:727)
    at Function.Module._load (electron/js2c/asar.js:769)
    at Module.require (internal/modules/cjs/loader.js:852)
    at require (internal/modules/cjs/helpers.js:74)
    at bindings (E:\code\electron-quick-start\node_modules\_[email protected]@bindings\bindings.js:112)
    at Object.<anonymous> (E:\code\electron-quick-start\node_modules\_@[email protected]@@serialport\bindings\lib\win32.js:1)

可以参考上面报错信息中的Issue ，在Electron9.0后就不允许在渲染进程中使用原生的模块。

解决方案一：在main.js中设置为false，就在渲染进程中使用原生模块,但是官方不推荐参考

app.allowRendererProcessReuse = false;

参考官方文档找到最佳的解决方案

解决方案二：采用主进程与渲染进程之间通讯方式，主进程传递串口的数据到渲染进程

官方进程之间通讯的示例如下

// 在主进程中.
const { ipcMain } = require('electron')
ipcMain.on('asynchronous-message', (event, arg) => {
  console.log(arg) // prints "ping"
  event.reply('asynchronous-reply', 'pong')
})

ipcMain.on('synchronous-message', (event, arg) => {
  console.log(arg) // prints "ping"
  event.returnValue = 'pong'
})

//在渲染器进程 (网页) 中。
const { ipcRenderer } = require('electron')
console.log(ipcRenderer.sendSync('synchronous-message', 'ping')) // prints "pong"

ipcRenderer.on('asynchronous-reply', (event, arg) => {
  console.log(arg) // prints "pong"
})
ipcRenderer.send('asynchronous-message', 'ping')

那么我们基于这个主进程与渲染进程通讯的思路进行改造，最终改造main.js

function createWindow () {
  // Create the browser window.
  const mainWindow = new BrowserWindow({
    width: 800,
    height: 600,
    webPreferences: {
      preload: path.join(__dirname, 'preload.js'),
      nodeIntegration: true
    }
  })

  // and load the index.html of the app.
  mainWindow.loadFile('index.html')

  // Open the DevTools.
  mainWindow.webContents.openDevTools()
  createSerialPort(mainWindow)
}

function createSerialPort(mainWindow){
  //开启串口，并发送到渲染线程中
  const port = new SerialPort('COM16');
  port.on('data',function(data){
    let strData = data+''
    //0 MW +00079.86 mm  
    let nValue = strData.replace('0 MW','').replace('mm','').trim()
    mainWindow.webContents.send("marh-data",parseFloat(nValue))
  });
}

render.js里面监听main.js的消息

const { ipcRenderer } = require('electron')

ipcRenderer.on('marh-data', (event, arg) => {
    inputs = document.getElementsByClassName('marData')
    let isSet = false
    for(let i = 0 ; i < inputs.length ; i++){
        if ( inputs[i].value == '' || inputs[i].value == 0){
            isSet = true
            inputs[i].value = arg
            return
        }
    }
  })

3. 项目打包

参考文章

electron-builder就是有比electron-packager有更丰富的的功能，支持更多的平台，同时也支持了自动更新，所以这里我选用electron-builder方式进行打包。

cnpm install electron-builder --save-dev
cnpm install electron-builder -g

在package.json中添加打包配置

"build": {
    "appId": "com.vase.app",
    "mac": {
      "target": ["dmg"]
    },
    "win": {
      "target": ["nsis"]
    }
},
"scripts": {
    "build": "electron-builder --win --x64"
},

执行命令打包

npm run build

打包成功会出现以下信息

整个打包过程比较艰辛，受限于咱们天朝的网络环境，打包过程中依赖出现各式各样的花式报错，这里建议慢慢的看错误信息，寻找解决方案，我整整花了4个小时完成打包。遇到一些诡异的错误可以重新安装依赖重试（npm管理没有Yarn依赖管理好）

# 删除依赖
rm -rf node_modules
rm package-lock.json
# 清空缓存
npm cache clear --force
# 重新安装
cnpm install

部门因为网络原因，无法下载工具已经放置在static/cache目录下下载完成后按照下图所示将工具放置在一下目录中

electron-v9.0.5-win32-x64.zip

nsis-3.0.4.1.7z

nsis-resources-3.4.1.7z

winCodeSign-2.6.0.7z

C:\Users\Administrator\AppData\Local\electron-builder\Cache

C:\Users\Administrator\AppData\Local\electron-builder\Cache\winCodeSign

C:\Users\Administrator\AppData\Local\electron-builder\Cache\nsis

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Electron与串口交互示例

1.环境准备

1.1 安装Node、Npm

1.2 安装cnpm

1.3 安装Electron

1.4 安装serialport

2.开始开发

2.1 目录结构

2.2 获取串口的信息

2.3 监听串口

2.4 在渲染进程中使用serialport

3. 项目打包

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 2 Commits
static		static
.gitignore		.gitignore
LICENSE.md		LICENSE.md
README.md		README.md
index.html		index.html
main.js		main.js
package.json		package.json
preload.js		preload.js
renderer.js		renderer.js

License

yetianyue/electron-serialport-start

Folders and files

Latest commit

History

Repository files navigation

Electron与串口交互示例

1.环境准备

1.1 安装Node、Npm

1.2 安装cnpm

1.3 安装Electron

1.4 安装serialport

2.开始开发

2.1 目录结构

2.2 获取串口的信息

2.3 监听串口

2.4 在渲染进程中使用serialport

3. 项目打包

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages