board: M5Stack Core2 module suppport

This Pull-Request features support for the M5Stack Core2 hardware. The module features a LCD display, touchscreen, battery, USB-Port, 8MB RAM and 18GB Flash. Basic features are working. See board documentation for details. Signed-off-by: Martin Kiepfer <[email protected]>
zephyrproject-rtos · Aug 24, 2023 · 8e7c9a3 · 8e7c9a3
1 parent 8a86733
commit 8e7c9a3
Show file tree

Hide file tree

Showing 11 changed files with 587 additions and 0 deletions.
diff --git a/boards/xtensa/m5stack_core2/Kconfig.board b/boards/xtensa/m5stack_core2/Kconfig.board
@@ -0,0 +1,8 @@
+# M5Stack Core2 board configuration
+
+# Copyright (c) 2023 Martin Kiepfer <[email protected]>
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_M5STACK_CORE2
+	bool "M5Stack Core2 Development Board"
+	depends on SOC_SERIES_ESP32
diff --git a/boards/xtensa/m5stack_core2/Kconfig.defconfig b/boards/xtensa/m5stack_core2/Kconfig.defconfig
@@ -0,0 +1,30 @@
+# M5Stack Core2 board configuration
+# Copyright (c) 2022 AVSystem Sławomir Wolf Sp.j. (AVSystem)
+# Copyright (c) 2023 Martin Kiepfer <[email protected]>
+# SPDX-License-Identifier: Apache-2.0
+
+if BOARD_M5STACK_CORE2
+
+config BOARD
+	default "m5stack_core2"
+	depends on BOARD_M5STACK_CORE2
+
+config ENTROPY_GENERATOR
+	default y
+
+config HEAP_MEM_POOL_SIZE
+	default 98304 if WIFI
+	default 65536 if BT
+	default 4096
+
+config KERNEL_MEM_POOL
+	default y
+
+choice BT_HCI_BUS_TYPE
+	default BT_ESP32 if BT
+endchoice
+
+config I2C
+	default y
+
+endif # BOARD_M5STACK_CORE2
diff --git a/boards/xtensa/m5stack_core2/board.cmake b/boards/xtensa/m5stack_core2/board.cmake
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: Apache-2.0
+
+if(NOT "${OPENOCD}" MATCHES "^${ESPRESSIF_TOOLCHAIN_PATH}/.*")
+  set(OPENOCD OPENOCD-NOTFOUND)
+endif()
+find_program(OPENOCD openocd PATHS ${ESPRESSIF_TOOLCHAIN_PATH}/openocd-esp32/bin NO_DEFAULT_PATH)
+
+include(${ZEPHYR_BASE}/boards/common/esp32.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
diff --git a/boards/xtensa/m5stack_core2/doc/img/m5stack_core2.webp b/boards/xtensa/m5stack_core2/doc/img/m5stack_core2.webp
diff --git a/boards/xtensa/m5stack_core2/doc/index.rst b/boards/xtensa/m5stack_core2/doc/index.rst
@@ -0,0 +1,194 @@
+.. _m5stack_core2:
+
+M5Stack Core2
+#############
+
+Overview
+********
+
+M5Stack Core2 is a ESP32-based development board from M5Stack. It is the successor for the Core module.
+
+M5Stack Core2 features the following integrated components:
+
+- ESP32-D0WDQ6-V3 chip (240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi)
+- PSRAM 8MB
+- Flash 16MB
+- LCD IPS TFT 2", 320x240 px screen (ILI9342C)
+- Touch screen (FT6336U)
+- PMU AXP192
+- Audio NS4168 amplifier (1W-092 speaker)
+- Vibration motor
+- RTC BM8563
+- USB CP2104
+- SD-Card slot
+- IMO 6-axis IMU MPU6886
+- MIC SPM1423
+- Battery 390mAh 3,7V
+
+.. figure:: img/m5stack_core2.webp
+        :align: center
+        :alt: M5Stack-Core2
+        :width: 400 px
+
+        M5Stack-Core2 module
+
+Functional Description
+**********************
+
+The following table below describes the key components, interfaces, and controls
+of the M5Stack Core2 board.
+
+.. _M5Core2 Schematic: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/schematic/Core/CORE2_V1.0_SCH.pdf
+.. _MPU-ESP32: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/esp32_datasheet_en_v3.9.pdf
+.. _TOUCH-FT6336U: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/Ft6336GU_Firmware%20外部寄存器_20151112-%20EN.xlsx
+.. _SND-NS4168: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/NS4168_CN_datasheet.pdf
+.. _MPU-6886: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/MPU-6886-000193%2Bv1.1_GHIC_en.pdf
+.. _LCD-ILI9342C: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/ILI9342C-ILITEK.pdf
+.. _SPM-1423: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/SPM1423HM4H-B_datasheet_en.pdf
+.. _RTC-BM8563: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/BM8563_V1.1_cn.pdf
+.. _SY7088: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/SY7088-Silergy.pdf
+.. _PMU-AXP192: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/AXP192_datasheet_en.pdf
+.. _VIB-1072_RFN01: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/core/1027RFN01-33d.pdf
+
++------------------+--------------------------------------------------------------------------+
+| Key Component    | Description                                                              |
++==================+==========================================================================+
+|| ESP32-D0WDQ6-V2 || This `MPU-ESP32`_ module provides complete Wi-Fi and Bluetooth          |
+|| module          || functionalities and integrates a 16-MB SPI flash.                       |
++------------------+--------------------------------------------------------------------------+
+|| 32.768 kHz RTC  || External precision 32.768 kHz crystal oscillator serves as a clock with |
+||                 || low-power consumption while the chip is in Deep-sleep mode.             |
++------------------+--------------------------------------------------------------------------+
+| Status LED       | One user LED connected to the GPIO pin.                                  |
++------------------+--------------------------------------------------------------------------+
+|| USB Port        || USB interface. Power supply for the board as well as the                |
+||                 || communication interface between a computer and the board.               |
+||                 || Contains: TypeC x 1, GROVE(I2C+I/O+UART) x 1                            |
++------------------+--------------------------------------------------------------------------+
+| Reset button     | Reset button                                                             |
++------------------+--------------------------------------------------------------------------+
+| Power Switch     | Power on/off button.                                                     |
++------------------+--------------------------------------------------------------------------+
+|| LCD screen      || Built-in LCD TFT display \(`LCD-ILI9342C`_, 2", 320x240 px\)            |
+||                 || controlled via SPI interface                                            |
++------------------+--------------------------------------------------------------------------+
+|| 3-axis          || The `MPU-6886`_ is a 6-axis MotionTracking device that combines a       |
+|| gyrosopce       || 3-axis gyroscope and a 3-axis accelerometer.                            |
++------------------+--------------------------------------------------------------------------+
+|| Built-in        || The `SPM-1423`_ I2S driven microphone.                                  |
+|| microphone      ||                                                                         |
++------------------+--------------------------------------------------------------------------+
+| Built-in speaker | 1W speaker for audio output via I2S interface.                           |
++------------------+--------------------------------------------------------------------------+
+
+Supported Features
+==================
+
+The Zephyr m5stack_core2 board configuration supports the following hardware features:
+
++-----------+------------+-------------------------------------+
+| Interface | Controller | Driver/Component                    |
++===========+============+=====================================+
+| NVIC      | on-chip    | nested vector interrupt controller  |
++-----------+------------+-------------------------------------+
+| UART      | on-chip    | serial port-polling;                |
+|           |            | serial port-interrupt               |
++-----------+------------+-------------------------------------+
+| PINMUX    | on-chip    | pinmux                              |
++-----------+------------+-------------------------------------+
+| GPIO      | on-chip    | gpio                                |
++-----------+------------+-------------------------------------+
+| I2C       | on-chip    | i2c                                 |
++-----------+------------+-------------------------------------+
+| SPI       | on-chip    | spi                                 |
++-----------+------------+-------------------------------------+
+| CLOCK     | on-chip    | reset and clock control             |
++-----------+------------+-------------------------------------+
+| COUNTER   | on-chip    | rtc                                 |
++-----------+------------+-------------------------------------+
+| WATCHDOG  | on-chip    | independent watchdog                |
++-----------+------------+-------------------------------------+
+| PWM       | on-chip    | pwm                                 |
++-----------+------------+-------------------------------------+
+| ADC       | on-chip    | adc                                 |
++-----------+------------+-------------------------------------+
+| DAC       | on-chip    | dac                                 |
++-----------+------------+-------------------------------------+
+| die-temp  | on-chip    | die temperature sensor              |
++-----------+------------+-------------------------------------+
+
+
+Start Application Development
+*****************************
+
+Before powering up your M5Stack Core2, please make sure that the board is in good
+condition with no obvious signs of damage.
+
+System requirements
+===================
+
+Prerequisites
+-------------
+
+Espressif HAL requires WiFi and Bluetooth binary blobs in order work. Run the command
+below to retrieve those files.
+
+.. code-block:: console
+
+   west blobs fetch hal_espressif
+
+.. note::
+
+   It is recommended running the command above after :file:`west update`.
+
+Building & Flashing
+-------------------
+
+Build and flash applications as usual (see :ref:`build_an_application` and
+:ref:`application_run` for more details).
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/hello_world
+   :board: m5stack_core2
+   :goals: build
+
+The usual ``flash`` target will work with the ``m5stack_core2`` board
+configuration. Here is an example for the :ref:`hello_world`
+application.
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/hello_world
+   :board: m5stack_core2
+   :goals: flash
+
+The baud rate of 921600bps is set by default. If experiencing issues when flashing,
+try using different values by using ``--esp-baud-rate <BAUD>`` option during
+``west flash`` (e.g. ``west flash --esp-baud-rate 115200``).
+
+You can also open the serial monitor using the following command:
+
+.. code-block:: shell
+
+   west espressif monitor
+
+After the board has automatically reset and booted, you should see the following
+message in the monitor:
+
+.. code-block:: console
+
+   ***** Booting Zephyr OS vx.x.x-xxx-gxxxxxxxxxxxx *****
+   Hello World! m5stack_core2
+
+Debugging
+---------
+
+M5Stack Core2 debugging is not supported due to pinout limitations.
+
+Related Documents
+*****************
+
+- `M5StickC PLUS schematic <https://static-cdn.m5stack.com/resource/docs/products/core/m5stickc_plus/m5stickc_plus_sch_03.webp>`_ (WEBP)
+- `ESP32-PICO-D4 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf>`_ (PDF)
+- `M5StickC PLUS docs <https://docs.m5stack.com/en/core/m5stickc_plus>`_
+- `ESP32 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf>`_ (PDF)
+- `ESP32 Hardware Reference <https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/index.html>`_
diff --git a/boards/xtensa/m5stack_core2/m5stack_core2-pinctrl.dtsi b/boards/xtensa/m5stack_core2/m5stack_core2-pinctrl.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2022 AVSystem Sławomir Wolf Sp.j. (AVSystem)
+ * Copyright (c) 2023 Martin Kiepfer <[email protected]>
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <zephyr/dt-bindings/pinctrl/esp-pinctrl-common.h>
+#include <dt-bindings/pinctrl/esp32-pinctrl.h>
+#include <zephyr/dt-bindings/pinctrl/esp32-gpio-sigmap.h>
+
+&pinctrl {
+
+	uart0_tx_gpio1: uart0_tx_gpio1 {
+		pinmux = <UART0_TX_GPIO1>;
+	};
+
+	uart0_rx_gpio3: uart0_rx_gpio3 {
+		pinmux = <UART0_RX_GPIO3>;
+		bias-pull-up;
+	};
+
+	spim3_default: spim3_default {
+		group1 {
+			pinmux = <SPIM3_MISO_GPIO38>,
+				 <SPIM3_SCLK_GPIO18>,
+				 <SPIM3_CSEL_GPIO5>;
+		};
+		group2 {
+			pinmux = <SPIM3_MOSI_GPIO23>;
+			output-low;
+		};
+	};
+
+	spim2_default: spim2_default {
+		group1 {
+			pinmux = <SPIM2_SCLK_GPIO6>,
+				 <SPIM2_MISO_GPIO7>,
+				 <SPIM2_CSEL_GPIO11>;
+		};
+		group2 {
+			pinmux = <SPIM2_MOSI_GPIO8>;
+			output-low;
+		};
+	};
+
+
+	i2c0_default: i2c0_default {
+		group1 {
+			pinmux = <I2C0_SDA_GPIO21>,
+				 <I2C0_SCL_GPIO22>;
+			bias-pull-up;
+			drive-open-drain;
+			output-high;
+		};
+	};
+
+};