v0.8.1

Wflow v0.8.1

Diff since v0.8.0

Merged pull requests:

• Reduce allocations in update vertical SBM concept (#450) (@verseve)

v0.8.0

Wflow v0.8.0

Diff since v0.7.3

Merged pull requests:

• Total Water Storage (#327) (@dalmijn)
• BMI get_grid_size function (#328) (@verseve)
• Check lake balance (#330) (@verseve)
• Don't expose scalar variables in the BMI (#332) (@verseve)
• Update sediment parameters (#337) (@JoostBuitink)
• Update publications.md (#338) (@aweerts)
• Support different vertical saturated hydraulic conductivity profiles in SBM (#340) (@verseve)
• Also update sediment units in struct (#341) (@JoostBuitink)
• Update publications.md (#343) (@aweerts)
• Fix docs sediment concentration parameters (#346) (@verseve)
• Update publications.md (#355) (@aweerts)
• Wflow ZMQ Server (#356) (@verseve)
• Fix set_states function of model type sbm (#358) (@verseve)
• Check if all states are covered (#359) (@JoostBuitink)
• Bump actions/checkout from 2 to 4 (#362) (@dependabot[bot])
• Bump actions/cache from 1 to 4 (#363) (@dependabot[bot])
• CompatHelper: bump compat for NCDatasets to 0.14, (keep existing compat) (#364) (@github-actions[bot])
• Add CLI tests (#366) (@Hofer-Julian)
• Add floodplain discharge to inflow reservoirs and lakes (#368) (@verseve)
• Function save_state (#370) (@verseve)
• Add local inertial routing scheme to sbm_gwf concept. (#371) (@verseve)
• Remove lower limit of zero for sbm.runoff (#373) (@verseve)
• Improve spelling and grammar in the introduction (#378) (@CFBaptista)
• Improve spelling and grammar in the user guide (#379) (@CFBaptista)
• SBM evaporation and use of fractions (#381) (@verseve)
• Improve spelling and grammar in the modeling documentation (#384) (@CFBaptista)
• Fix BMI.update_until (InexactError: Int64) (#387) (@verseve)
• Replace non-ASCII characters by ASCII characters in the names of variables, structs, functions and macros (#388) (@CFBaptista)
• Bump prefix-dev/setup-pixi from 0.5.1 to 0.5.2 (#389) (@dependabot[bot])
• Replace use of LoopVectorization in local inertial model stable_timestep function with Polyester (reduction) (#390) (@verseve)
• Bump prefix-dev/setup-pixi from 0.5.2 to 0.6.0 (#396) (@dependabot[bot])
• Fix broken doc links (#397) (@verseve)
• Water demand and allocation in sbm model concept (#402) (@verseve)
• Update publications.md (#412) (@verseve)
• Bump julia-actions/cache from 1 to 2 (#413) (@dependabot[bot])
• Bump prefix-dev/setup-pixi from 0.6.0 to 0.7.0 (#415) (@dependabot[bot])
• Bump prefix-dev/setup-pixi from 0.7.0 to 0.8.0 (#421) (@dependabot[bot])
• Update sediment model documentation (#422) (@CFBaptista)
• Fix required states sbm_gwf model type (#424) (@verseve)
• Bump prefix-dev/setup-pixi from 0.8.0 to 0.8.1 (#426) (@dependabot[bot])
• Quick boundary fix (#430) (@dalmijn)
• Stop using local JULIAUP_DEPOT_PATH (#438) (@visr)
• Prepare release v0.8.0 (#449) (@verseve)

Closed issues:

• OpenDA coupling (#93)
• improvement reduction function Feddes (#102)
• Include water demand and allocation (#223)
• Support Total Water Storage (SBM concept) as output variable (#281)
• Check if all states are provided when using reinit=false (#293)
• Support different vertical hydraulic conductivity (kv) profiles in SBM (#313)
• Lake module: with small lakes and/or dry conditions simulation fails (#329)
• BMI and request of scalar variables (#331)
• Bedconc, SSconc and Sedconc are in g/m3 and not kg/m3 (#336)
• Add local inertial routing to sbm_gwf concept (#344)
• Sediment Concentration Parameters in Docs (#345)
• Re-infiltration of Surface Water (#349)
• Unicode Character Usage and Consistency (#352)
• Fix set_states for modeltype sbm with local inertial model for 1D river and 2D overland flow. (#357)
• Wflow_sbm run fails with local inertial routing (virtual machine) (#360)
• Local inertial routing: floodplain discharge is not added to inflow reservoir or lake (#367)
• Function save_state should close state file (#369)
• Remove lower limit of zero for sbm.runoff (#372)
• SBM evaporation and fractions (open water, vegetation, soil surface) (#374)
• Improve spelling and grammar in documentation (#377)
• BMI.update_until can throw an InexactError (#386)
• Inaccessible links (#395)
• SBM variables vwc_root and vwc_percroot can have NaN values (#416)
• cli runner for native linux installation (#420)
• States checking for model type sbm_gwf is missing required river and land state :h_av (#423)
• Model type sbm_gwf: do not reset heads for constanthead boundary (#429)

v0.7.3

Wflow v0.7.3

Diff since v0.7.2

Merged pull requests:

• Cyclic times (#298) (@verseve)
• Wflow_sbm figure leakage term and ksathorfrac documentation (#303) (@verseve)
• CompatHelper: bump compat for NCDatasets to 0.13, (keep existing compat) (#305) (@github-actions[bot])
• BMI: bug fixes and updates (#306) (@verseve)
• CompatHelper: add new compat entry for Statistics at version 1, (keep existing compat) (#309) (@github-actions[bot])
• update Project compat entries (#311) (@visr)
• Update publications.md (#318) (@aweerts)
• Update publications.md (#320) (@aweerts)
• CompatHelper: bump compat for NCDatasets to 0.14, (keep existing compat) (#321) (@github-actions[bot])
• Modified puls (#323) (@verseve)
• Update list of contributors docs and zenodo (#324) (@verseve)
• Kvfrac leakage (#325) (@verseve)

Closed issues:

• Support different cyclic_times (#277)
• document ksathorfrac (#279)
• Add leakage term to wflow_sbm figure (#297)
• ERROR: NetCDF error: NetCDF: Invalid dimension ID or name (NetCDF error code: -46) (#301)
• BMI get_value and grid type (#304)
• bmi.get_current_time and bmi.get_end_time are broken. (#307)
• Support for CFTime.DateTimeNoLeap calendar (#308)

v0.7.2

Wflow v0.7.2

Diff since v0.7.1

Merged pull requests:

• Repo (#284) (@dalmijn)
• Move wflow_cli code from GitLab (#295) (@JoostBuitink)
• Fix rutter interception (#300) (@verseve)

Closed issues:

• Create Dockerfile and host image publically (#109)
• merge wflow_cli from gitlab to github (#274)
• Water balance Rutter interception model (#299)
• Cannot run model when adding inflow q_av at lat lon pair to forcing file (#302)

v0.7.1

Wflow v0.7.1

Diff since v0.7.0

Merged pull requests:

• fix parameter name: khfrac to ksathorfrac (#278) (@visr)
• Fix states floodplain (#282) (@verseve)

v0.7.0

Wflow v0.7.0

Diff since v0.6.3

Closed issues:

• HQ approach for reservoirs (#242)
• ERROR: unsupported cyclic timeseries when running the wflow model in Julia language (#247)
• ERROR: One or more cycles detected in flow graph. (#248)
• ERROR: LoadError: ArgumentError: Package Wflow does not have Distributed (#251)
• Flows to be printed for each grid cell (#252)
• bug when lakes is true (#258)
• Merging era5_land and era5_single netcdf files (#260)
• Saving total evaporation with SBM (#263)
• Error: unsupported cyclic timeseries (#269)
• Logging of run time (#271)

Merged pull requests:

• define BMI.get_time_units on model instance (#245) (@visr)
• BMI use simulation starttime as t = 0, not 1970 (#246) (@visr)
• Res lake hq (#250) (@verseve)
• Update codecov-action
  (#253) (@Hofer-Julian)
• fix initialize lake function name (#259) (@verseve)
• Resolve overhead Threads.@threads (> 8 threads) (#261) (@verseve)
• Starttime (#262) (@verseve)
• Add interception to total actual evapotranspiration actevap (#264) (@verseve)
• Add sum to reducer options (#272) (@JoostBuitink)

v0.6.3

Wflow v0.6.3

Diff since v0.6.2

Closed issues:

• GroundwaterFlow: support exponential decline of hydraulic conductivity with depth (#179)
• 1D floodplain schematization in local inertial routing (#220)
• Improve error when _FillValue in time dimension (#221)
• create staticmap with dummy data for floodplain (#228)
• adding param = "lateral.river.reservoir.volume" gives error (#231)
• Reading time from multiple forcing netCDF files (> 2Gb) very slow (#238)
• Day of year for lake model (#239)

Merged pull requests:

• add extra tests from Aqua (#219) (@visr)
• Allow for _FillValue in time dimension (#229) (@JoostBuitink)
• Support for declining horizontal conductivity in sbm_gwf concept (#230) (@JoostBuitink)
• CompatHelper: bump compat for LoggingExtras to 1, (keep existing compat) (#232) (@github-actions[bot])
• optional 1d floodplain schematization for local inertial river flow (#233) (@verseve)
• NCDatasets and multifile reading (#240) (@verseve)
• Fix time cyclic input and lake rating curve (column index) (#241) (@verseve)

v0.6.2

Wflow v0.6.2

Diff since v0.6.1

Merged pull requests:

• CompatHelper: bump compat for LoggingExtras to 0.5, (keep existing compat) (#212) (@github-actions[bot])
• Local inertial 1D-2D: inflow, reservoirs and lakes (#213) (@verseve)
• remove _FillValue from coordinate variables (#215) (@visr)
• unpin netcdf (#216) (@visr)
• Glacier parameter g_sifrac (conversion) (#217) (@verseve)
• Some small optimisations and fix dt local inertial model (1D and 2D) (#218) (@verseve)

v0.6.1

Wflow v0.6.1

Diff since v0.6.0

Closed issues:

• Error when creating log in new directory (#209)

Merged pull requests:

• Create dir before creating log file (#210) (@JoostBuitink)
• fix for NCDatasets 0.12.3 (#211) (@visr)

v0.6.0

Wflow v0.6.0

Diff since v0.5.2

Closed issues:

• add compression to NetCDF output (#123)
• Flextopo implementation in Julia (#178)
• Simplified Bagnold parameters (#190)
• unit of variable ssf (#202)
• local inertial land: h_av remains zero for river cells (#206)

Merged pull requests:

• Updated documentation (#184) (@JoostBuitink)
• Flextopo (#194) (@laurenebouaziz)
• fix NetCDF_jll to a known working build (#200) (@visr)
• CompatHelper: bump compat for NCDatasets to 0.12, (keep existing compat) (#203) (@github-actions[bot])
• Change unit of lateral subsurface flow (ssf) (#204) (@verseve)
• test doc flextopo (#205) (@laurenebouaziz)
• Fix calculation of h_av as part of 2D overland flow (#207) (@verseve)
• Support compression of NetCDF file (#208) (@JoostBuitink)