Add lines catalogue and get_catalogue method

.pre-commit-config.yaml

@@ -1,10 +1,9 @@
-exclude: ^.idea/|^conda/meta.yaml
+exclude: ^.idea/|.vscode/|^conda/meta.yaml
 repos:
   - repo: https://github.com/pre-commit/pre-commit-hooks
     rev: v4.5.0
     hooks:
       - id: check-json
-        exclude: ^.vscode/
       - id: check-merge-conflict
       - id: check-toml
       - id: check-yaml
@@ -35,4 +34,3 @@ repos:
     hooks:
       - id: prettier
         args: ["--print-width", "120"]
-        exclude: ^.vscode/

.vscode/cspell.json

@@ -7,6 +7,7 @@
   "words": [
     "abcn",
     "absolufy",
+    "acsr",
     "asarray",
     "astype",
     "bysource",
@@ -34,10 +35,13 @@
     "susceptance",
     "transfo",
     "ureg",
+    "xlpe",
     "yesqa"
   ],
   // flagWords - list of words to be always considered incorrect
   // This is useful for offensive words and common spelling errors.
   // For example "hte" should be "the"
-  "flagWords": ["hte"]
+  "flagWords": [
+    "hte"
+  ]
 }

.vscode/settings.json

@@ -25,5 +25,9 @@
   "[markdown][yaml][html][css]": {
     "editor.defaultFormatter": "esbenp.prettier-vscode",
     "editor.formatOnSave": true,
-  }
+  },
+  // Json
+  "[json]": {
+    "editor.indentSize": 2,
+  },
 }

.vscode/tasks.json

@@ -5,7 +5,7 @@
   "options": { "cwd": "${workspaceFolder}" },
   "presentation": {
     "showReuseMessage": true,
-    "clear": true
+    "clear": true,
   },
   "tasks": [
     {
@@ -15,13 +15,13 @@
       "command": "make -C doc html",
       "group": {
         "kind": "build",
-        "isDefault": true
+        "isDefault": true,
       },
       "problemMatcher": [],
       "presentation": {
         "reveal": "silent",
-        "focus": true
-      }
+        "focus": true,
+      },
     },
     {
       "label": "Open docs",
@@ -32,13 +32,13 @@
         "reveal": "never",
         "close": true,
         "focus": false,
-        "panel": "dedicated"
+        "panel": "dedicated",
       },
       "group": {
         "kind": "build",
-        "isDefault": true
+        "isDefault": true,
       },
-      "isBackground": true
-    }
-  ]
+      "isBackground": true,
+    },
+  ],
 }

conda/environment.yml

@@ -11,7 +11,6 @@ dependencies:
   - regex >=2022.1.18
   - pint >=0.21.0
   - typing_extensions >=4.6.2
-  - rich >=13.5.1
   - pyproj >=3.3.0
   - matplotlib-base >=3.7.2
   - networkx >=3.0.0

conda/meta.yaml

@@ -33,7 +33,6 @@ requirements:
     - regex >=2022.1.18
     - pint >=0.21.0
     - typing_extensions >=4.6.2
-    - rich >=13.5.1
     - pyproj >=3.3.0
     - matplotlib-base >=3.7.2
     - networkx >=3.0.0

doc/conf.py

@@ -128,7 +128,6 @@
     "geopandas": ("https://geopandas.org/en/stable/", None),
     "pint": ("https://pint.readthedocs.io/en/stable/", None),
     "typing_extensions": ("https://typing-extensions.readthedocs.io/en/stable/", None),
-    "rich": ("https://rich.readthedocs.io/en/stable/", None),
     "matplotlib": ("https://matplotlib.org/stable/", None),
     "networkx": ("https://networkx.org/documentation/stable/", None),
 }

doc/models/Line/Parameters.md

@@ -2,25 +2,32 @@
 
 # Parameters
 
-The line parameters are briefly described [here](models-line_parameters). In this page, the alternative constructors
-of `LineParameters` objects are detailed.
+As described [in the previous page](models-line_parameters), a line parameters object contains the
+impedance and shunt admittance matrices representing the line model. Sometimes you do not have
+these matrices available but you have other data such as symmetric components or geometric
+configurations and material types.
+
+This page describes how to build the impedance and shunt admittance matrices and thus the line
+parameters object using these alternative data. This is achieved via the alternative constructors
+of the `LineParameters` class. Note that only 3-phase lines are supported by the alternative
+constructors.
 
 (models-line_parameters-alternative_constructors-symmetric)=
 
 ## Symmetric model
 
 ### Definition
 
-The `LineParameters` class has a class method called `from_sym` which converts zero and direct sequences of
-impedance and admittance into a line parameters instance. This method requires the following data:
+Line parameters can be built from a symmetric model of the line using the `LineParameters.from_sym`
+class method. This method takes the following data:
 
 - The zero sequence of the impedance (in $\Omega$/km), noted $\underline{Z_0}$ and `z0` in the code.
 - The direct sequence of the impedance (in $\Omega$/km), noted $\underline{Z_1}$ and `z1` in the code.
 - The zero sequence of the admittance (in S/km), noted $\underline{Y_0}$ and `y0` in the code.
 - The direct sequence of the admittance (in S/km), noted $\underline{Y_1}$ and `y1` in the code.
 
-Then, it combines them in order to build the series impedance matrix $\underline{Z}$ and the shunt admittance matrix
-$\underline{Y}$ using the following equations:
+The symmetric componenets are then used to build the series impedance matrix $\underline{Z}$ and
+the shunt admittance matrix $\underline{Y}$ using the following equations:
 
 ```{math}
 \begin{aligned}
@@ -51,8 +58,7 @@ defined as:
 \end{aligned}
 ```
 
-This class method also takes optional parameters which are used to add a neutral wire to the previously seen
-three-phase matrices. These optional parameters are:
+For lines with a neutral, this method also takes the following optional extra parameters:
 
 - The neutral impedance (in $\Omega$/km), noted $\underline{Z_{\mathrm{n}}}$ and `zn` in the code.
 - The phase-to-neutral reactance (in $\Omega$/km), noted $\left(\underline{X_{p\mathrm{n}}}\right)_{p\in\{\mathrm{a},
@@ -63,8 +69,9 @@ three-phase matrices. These optional parameters are:
   \mathrm{b},\mathrm{c}\}}$. As these are supposed to be the same, this unique value is noted `bpn` in the code.
 
 ```{note}
-If any of those parameters is omitted, the neutral wire is omitted and a 3 phase line parameters is built.
-If $\underline{Z_{\mathrm{n}}}$ and $\underline{X_{p\mathrm{n}}}$ are zeros, the same happens.
+If any of those parameters is omitted or if $\underline{Z_{\mathrm{n}}}$ and
+$\underline{X_{p\mathrm{n}}}$ are zeros, the neutral wire is omitted and a 3-phase line parameters
+is built.
 ```
 
 In this case, the following matrices are built:
@@ -102,8 +109,8 @@ respectively the phase-to-neutral series impedance (in $\Omega$/km), the neutral
 the phase-to-neutral shunt admittance (in S/km).
 
 ````{note}
-The computed impedance matrix may be non-invertible. In this case, the `from_sym` class method builds impedance and
-shunt admittance matrices using the following definitions:
+If the computed impedance matrix is be non-invertible, the `from_sym` class method builds impedance
+and shunt admittance matrices using the following definitions:
 
 ```{math}
 \begin{aligned}
@@ -204,7 +211,7 @@ matrices from dimensions and materials used for the insulator and the conductors
 proposed: the first one is for a twisted line and the second is for an underground line. Both of them include a
 neutral wire.
 
-This class methods accepts the following arguments:
+This class method accepts the following arguments:
 
 - the line type to choose between the twisted and the underground options.
 - the conductor type which defines the material of the conductors.
@@ -231,15 +238,15 @@ where:
 
 The following resistivities are used by _Roseau Load Flow_:
 
-| Material      | Resistivity ($\Omega$m) |
-| :------------ | :---------------------- |
-| Copper        | $1.72\times10^{-8}$     |
-| Aluminium     | $2.82\times10^{-8}$     |
-| Almélec       | $3.26\times10^{-8}$     |
-| Alu-Acier     | $4.0587\times10^{-8}$   |
-| Almélec-Acier | $3.26\times10^{-8}$     |
+| Material                   | Resistivity ($\Omega$m) |
+| :------------------------- | :---------------------- |
+| Copper -- Fr: Cuivre       | $1.72\times10^{-8}$     |
+| Aluminum -- Fr: Aluminium  | $2.82\times10^{-8}$     |
+| Al-Mg Alloy -- Fr: Almélec | $3.26\times10^{-8}$     |
+| ACSR -- Fr: Alu-Acier      | $4.0587\times10^{-8}$   |
+| AACSR -- Fr: Almélec-Acier | $3.26\times10^{-8}$     |
 
-These values are defined in the `utils` module: [](#roseau.load_flow.utils.constants.RHO).
+These values are defined in the `utils` module: {data}`roseau.load_flow.utils.constants.RHO`.
 
 #### Inductance
 
@@ -271,7 +278,7 @@ where:
 - $D_{ij}$ the distances between the center of the conductor $i$ and the center of the conductor $j$
 - $GMR_i$ the _geometric mean radius_ of the conductor $i$.
 
-The vacuum magnetic permeability is defined in the `utils` module [](#roseau.load_flow.utils.constants.MU_0).
+The vacuum magnetic permeability is defined in the `utils` module {data}`roseau.load_flow.utils.constants.MU_0`.
 
 The geometric mean radius is defined for all $i\in \{\mathrm{a}, \mathrm{b}, \mathrm{c}, \mathrm{n}\}$ as
 

doc/models/Transformer/Center_Tapped_Transformer.md

@@ -95,7 +95,9 @@ load_bus = Bus(id="load_bus", phases="abc")
 mv_load = PowerLoad("mv_load", load_bus, powers=[10000, 10000, 10000])
 
 # Connect the two MV buses with a line
-lp = LineParameters.from_name_mv("U_AL_150")  # Underground, ALuminium, 150mm²
+lp = LineParameters.from_catalogue(
+    id="U_AL_150", model="iec"
+)  # Underground, ALuminium, 150mm²
 line = Line("line", source_bus, load_bus, parameters=lp, length=1.0, ground=ground)
 
 # Create a low-voltage bus and a load