Hover games 3

This repo forked allow the data of BME688 to be read via the i2c interface on the NavQ board.

For installation only follow the Development installation instructions

To test it, once the bme sensor is connected run the example file read_all.py:

python3 read_all.py

The repo also contains a ROS 2 wrapper which is in WIP

BME68x

BME68x is a series of state-of-the-art environmental sensors that let you measure temperature, pressure, humidity and indoor air quality.

This library is designed to work with the following products:

• BME680 Breakout - https://shop.pimoroni.com/products/bme680
• BME688 4-in-1 Air Quality Breakout - https://shop.pimoroni.com/products/bme688-breakout

Installing

Full install (recommended):

We've created an easy installation script that will install all pre-requisites and get your BME68x up and running with minimal efforts. To run it, fire up Terminal which you'll find in Menu -> Accessories -> Terminal on your Raspberry Pi desktop, as illustrated below:

In the new terminal window type the command exactly as it appears below (check for typos) and follow the on-screen instructions:

curl https://get.pimoroni.com/bme680 | bash

Manual install:

Library install for Python 3:

sudo pip3 install bme680

Library install for Python 2:

sudo pip2 install bme680

Development:

If you want to contribute, or like living on the edge of your seat by having the latest code, you should clone this repository, cd to the library directory, and run:

sudo python3 setup.py install

(or sudo python setup.py install whichever your primary Python environment may be)

In all cases you will have to have I2C enabled (sudo raspi-config, under 'Interfacing Options').

Documentation & Support

• Guides and tutorials - https://learn.pimoroni.com/bme680-breakout
• Get help - http://forums.pimoroni.com/c/support