Adds 9bit reception support to the TI uart drivers.

include/freertos/tc_ioctl.h

@@ -46,11 +46,14 @@
 #define TCPAREVEN   IO(TERMIOS_IOC_MAGIC, 0xF2)
 #define TCPARONE    IO(TERMIOS_IOC_MAGIC, 0xF3)
 #define TCPARZERO   IO(TERMIOS_IOC_MAGIC, 0xF4)
+/// Use 9-bit reception mode
+#define TCNINEBITRX IO(TERMIOS_IOC_MAGIC, 0xF5)
 /// One stop bit
 #define TCSTOPONE   IO(TERMIOS_IOC_MAGIC, 0xF8) 
 /// Two stop bits
 #define TCSTOPTWO   IO(TERMIOS_IOC_MAGIC, 0xF9)
 
+
 /// Argument is a Notifiable* pointer. This notifiable will be invoked when all
 /// bytes have completed transferring and the transmit engine is idle.
 #define TCDRAINNOTIFY   IOW(TERMIOS_IOC_MAGIC, 0xE0, 4)

src/freertos_drivers/ti/CC32xxUart.cxx

@@ -75,6 +75,7 @@ CC32xxUart::CC32xxUart(const char *name, unsigned long base, uint32_t interrupt,
     , uartMode_(mode | UART_CONFIG_PAR_NONE)
     , txPending_(false)
     , hwFIFO_(hw_fifo)
+    , nineBit_(false)
 {
     static_assert(
         UART_CONFIG_PAR_NONE == 0, "driverlib changed against our assumptions");
@@ -169,6 +170,13 @@ int CC32xxUart::ioctl(File *file, unsigned long int key, unsigned long data)
             uartMode_ |= UART_CONFIG_PAR_ONE;
             MAP_UARTParityModeSet(base_, UART_CONFIG_PAR_ONE);
             break;
+        case TCNINEBITRX:
+            nineBit_ = data != 0;
+            if (!nineBit_)
+            {
+                break;
+            }
+            // fall through
         case TCPARZERO:
             uartMode_ &= ~UART_CONFIG_PAR_MASK;
             uartMode_ |= UART_CONFIG_PAR_ZERO;
@@ -289,14 +297,34 @@ void CC32xxUart::interrupt_handler()
     while (MAP_UARTCharsAvail(base_))
     {
         long data = MAP_UARTCharGetNonBlocking(base_);
-        if (data >= 0 && data <= 0xff)
+        if (nineBit_)
         {
-            unsigned char c = data;
-            if (rxBuf->put(&c, 1) == 0)
+            if (rxBuf->space() < 2)
             {
                 ++overrunCount;
             }
-            rxBuf->signal_condition_from_isr();
+            else
+            {
+                // parity error bit is moved to the ninth bit, then two bytes
+                // are written to the buffer.
+                long bit9 = (data & 0x200) >> 1;
+                data &= 0xff;
+                data |= bit9;
+                rxBuf->put((uint8_t *)&data, 2);
+                rxBuf->signal_condition_from_isr();
+            }
+        }
+        else
+        {
+            if (data >= 0 && data <= 0xff)
+            {
+                unsigned char c = data;
+                if (rxBuf->put(&c, 1) == 0)
+                {
+                    ++overrunCount;
+                }
+                rxBuf->signal_condition_from_isr();
+            }
         }
     }
     /* transmit a character if we have pending tx data */

src/freertos_drivers/ti/CC32xxUart.hxx

@@ -124,6 +124,7 @@ private:
     uint32_t uartMode_; /**< mode of the UART, 8 or 9 bit, 1 or 2 stop... */
     uint8_t txPending_; /**< transmission currently pending */
     uint8_t hwFIFO_; /**< true if hardware fifo is to be enabled, else false */
+    uint8_t nineBit_; /**< true if using 9-bit reception */
 
     /** Default constructor.
      */

src/freertos_drivers/ti/TivaDev.hxx

@@ -229,6 +229,7 @@ private:
     uint8_t hwFIFO_; /**< enable HW FIFO */
     uint8_t uartMode_; /**< uart config (mode) flags */
     uint8_t txPending_; /**< transmission currently pending */
+    uint8_t nineBit_; /**< true if using 9-bit reception */
 
     /** Default constructor.
      */

src/freertos_drivers/ti/TivaUart.cxx

@@ -71,6 +71,7 @@ TivaUart::TivaUart(const char *name, unsigned long base, uint32_t interrupt,
     , hwFIFO_(hw_fifo)
     , uartMode_(mode)
     , txPending_(false)
+    , nineBit_(false)
 {
     static_assert(
         UART_CONFIG_PAR_NONE == 0, "driverlib changed against our assumptions");
@@ -218,14 +219,34 @@ void TivaUart::interrupt_handler()
     while (MAP_UARTCharsAvail(base_))
     {
         long data = MAP_UARTCharGetNonBlocking(base_);
-        if (data >= 0 && data <= 0xff)
+        if (nineBit_)
         {
-            unsigned char c = data;
-            if (rxBuf->put(&c, 1) == 0)
+            if (rxBuf->space() < 2)
             {
-                overrunCount++;
+                ++overrunCount;
+            }
+            else
+            {
+                // parity error bit is moved to the ninth bit, then two bytes
+                // are written to the buffer.
+                long bit9 = (data & 0x200) >> 1;
+                data &= 0xff;
+                data |= bit9;
+                rxBuf->put((uint8_t *)&data, 2);
+                rxBuf->signal_condition_from_isr();
+            }
+        }
+        else
+        {
+            if (data >= 0 && data <= 0xff)
+            {
+                unsigned char c = data;
+                if (rxBuf->put(&c, 1) == 0)
+                {
+                    overrunCount++;
+                }
+                rxBuf->signal_condition_from_isr();
             }
-            rxBuf->signal_condition_from_isr();
         }
     }
     /* transmit a character if we have pending tx data */
@@ -302,6 +323,13 @@ int TivaUart::ioctl(File *file, unsigned long int key, unsigned long data)
             uartMode_ |= UART_CONFIG_PAR_ONE;
             MAP_UARTParityModeSet(base_, UART_CONFIG_PAR_ONE);
             break;
+        case TCNINEBITRX:
+            nineBit_ = data != 0;
+            if (!nineBit_)
+            {
+                break;
+            }
+            // fall through
         case TCPARZERO:
             uartMode_ &= ~UART_CONFIG_PAR_MASK;
             uartMode_ |= UART_CONFIG_PAR_ZERO;