[verible-verilog-format] reported by reviewdog 🐶 Raw Output: design/dbg/el2_dbg.sv:27:-`include "el2_param.vh" design/dbg/el2_dbg.sv:28:- )( design/dbg/el2_dbg.sv:29:- // outputs to the core for command and data interface design/dbg/el2_dbg.sv:30:- output logic [31:0] dbg_cmd_addr, design/dbg/el2_dbg.sv:31:- output logic [31:0] dbg_cmd_wrdata, design/dbg/el2_dbg.sv:32:- output logic dbg_cmd_valid, design/dbg/el2_dbg.sv:33:- output logic dbg_cmd_write, // 1: write command, 0: read_command design/dbg/el2_dbg.sv:34:- output logic [1:0] dbg_cmd_type, // 0:gpr 1:csr 2: memory design/dbg/el2_dbg.sv:35:- output logic [1:0] dbg_cmd_size, // size of the abstract mem access debug command design/dbg/el2_dbg.sv:36:- output logic dbg_core_rst_l, // core reset from dm design/dbg/el2_dbg.sv:37:- design/dbg/el2_dbg.sv:38:- // inputs back from the core/dec design/dbg/el2_dbg.sv:39:- input logic [31:0] core_dbg_rddata, design/dbg/el2_dbg.sv:40:- input logic core_dbg_cmd_done, // This will be treated like a valid signal design/dbg/el2_dbg.sv:41:- input logic core_dbg_cmd_fail, // Exception during command run design/dbg/el2_dbg.sv:42:- design/dbg/el2_dbg.sv:43:- // Signals to dma to get a bubble design/dbg/el2_dbg.sv:44:- output logic dbg_dma_bubble, // Debug needs a bubble to send a valid design/dbg/el2_dbg.sv:45:- input logic dma_dbg_ready, // DMA is ready to accept debug request design/dbg/el2_dbg.sv:46:- design/dbg/el2_dbg.sv:47:- // interface with the rest of the core to halt/resume handshaking design/dbg/el2_dbg.sv:48:- output logic dbg_halt_req, // This is a pulse design/dbg/el2_dbg.sv:49:- output logic dbg_resume_req, // Debug sends a resume requests. Pulse design/dbg/el2_dbg.sv:50:- input logic dec_tlu_debug_mode, // Core is in debug mode design/dbg/el2_dbg.sv:51:- input logic dec_tlu_dbg_halted, // The core has finished the queiscing sequence. Core is halted now design/dbg/el2_dbg.sv:52:- input logic dec_tlu_mpc_halted_only, // Only halted due to MPC design/dbg/el2_dbg.sv:53:- input logic dec_tlu_resume_ack, // core sends back an ack for the resume (pulse) design/dbg/el2_dbg.sv:54:- design/dbg/el2_dbg.sv:55:- // inputs from the JTAG design/dbg/el2_dbg.sv:56:- input logic dmi_reg_en, // read or write design/dbg/el2_dbg.sv:57:- input logic [6:0] dmi_reg_addr, // address of DM register design/dbg/el2_dbg.sv:58:- input logic dmi_reg_wr_en, // write instruction design/dbg/el2_dbg.sv:59:- input logic [31:0] dmi_reg_wdata, // write data design/dbg/el2_dbg.sv:60:- design/dbg/el2_dbg.sv:61:- // output design/dbg/el2_dbg.sv:62:- output logic [31:0] dmi_reg_rdata, // read data design/dbg/el2_dbg.sv:63:- design/dbg/el2_dbg.sv:64:- // AXI Write Channels design/dbg/el2_dbg.sv:65:- output logic sb_axi_awvalid, design/dbg/el2_dbg.sv:66:- input logic sb_axi_awready, design/dbg/el2_dbg.sv:67:- /* exclude signals that are tied to constant value in this file */ design/dbg/el2_dbg.sv:68:- /*verilator coverage_off*/ design/dbg/el2_dbg.sv:69:- output logic [pt.SB_BUS_TAG-1:0] sb_axi_awid, design/dbg/el2_dbg.sv:70:- /*verilator coverage_on*/ design/dbg/el2_dbg.sv:71:- output logic [31:0] sb_axi_awaddr, design/dbg/el2_dbg.sv:72:- output logic [3:0] sb_axi_awregion, design/dbg/el2_dbg.sv:73:- /* exclude signals that are t

[verible-verilog-format] reported by reviewdog 🐶 Raw Output: design/ifu/el2_ifu_mem_ctl.sv:27:-`include "el2_param.vh" design/ifu/el2_ifu_mem_ctl.sv:28:- ) design/ifu/el2_ifu_mem_ctl.sv:29:- ( design/ifu/el2_ifu_mem_ctl.sv:30:- input logic clk, // Clock only while core active. Through one clock header. For flops with second clock header built in. Connected to ACTIVE_L2CLK. design/ifu/el2_ifu_mem_ctl.sv:31:- input logic active_clk, // Clock only while core active. Through two clock headers. For flops without second clock header built in. design/ifu/el2_ifu_mem_ctl.sv:32:- input logic free_l2clk, // Clock always. Through one clock header. For flops with second header built in. design/ifu/el2_ifu_mem_ctl.sv:33:- input logic rst_l, // reset, active low design/ifu/el2_ifu_mem_ctl.sv:34:- design/ifu/el2_ifu_mem_ctl.sv:35:- input logic exu_flush_final, // Flush from the pipeline., includes flush lower design/ifu/el2_ifu_mem_ctl.sv:36:- input logic dec_tlu_flush_lower_wb, // Flush lower from the pipeline. design/ifu/el2_ifu_mem_ctl.sv:37:- input logic dec_tlu_flush_err_wb, // Flush from the pipeline due to perr. design/ifu/el2_ifu_mem_ctl.sv:38:- input logic dec_tlu_i0_commit_cmt, // committed i0 instruction design/ifu/el2_ifu_mem_ctl.sv:39:- input logic dec_tlu_force_halt, // force halt. design/ifu/el2_ifu_mem_ctl.sv:40:- design/ifu/el2_ifu_mem_ctl.sv:41:- input logic [31:1] ifc_fetch_addr_bf, // Fetch Address byte aligned always. F1 stage. design/ifu/el2_ifu_mem_ctl.sv:42:- input logic ifc_fetch_uncacheable_bf, // The fetch request is uncacheable space. F1 stage design/ifu/el2_ifu_mem_ctl.sv:43:- input logic ifc_fetch_req_bf, // Fetch request. Comes with the address. F1 stage design/ifu/el2_ifu_mem_ctl.sv:44:- input logic ifc_fetch_req_bf_raw, // Fetch request without some qualifications. Used for clock-gating. F1 stage design/ifu/el2_ifu_mem_ctl.sv:45:- input logic ifc_iccm_access_bf, // This request is to the ICCM. Do not generate misses to the bus. design/ifu/el2_ifu_mem_ctl.sv:46:- input logic ifc_region_acc_fault_bf, // Access fault. in ICCM region but offset is outside defined ICCM. design/ifu/el2_ifu_mem_ctl.sv:47:- input logic ifc_dma_access_ok, // It is OK to give dma access to the ICCM. (ICCM is not busy this cycle). design/ifu/el2_ifu_mem_ctl.sv:48:- input logic dec_tlu_fence_i_wb, // Fence.i instruction is committing. Clear all Icache valids. design/ifu/el2_ifu_mem_ctl.sv:49:- input logic ifu_bp_hit_taken_f, // Branch is predicted taken. Kill the fetch next cycle. design/ifu/el2_ifu_mem_ctl.sv:50:- design/ifu/el2_ifu_mem_ctl.sv:51:- input logic ifu_bp_inst_mask_f, // tell ic which valids to kill because of a taken branch, right justified design/ifu/el2_ifu_mem_ctl.sv:52:- design/ifu/el2_ifu_mem_ctl.sv:53:- output logic ifu_miss_state_idle, // No icache misses are outstanding. design/ifu/el2_ifu_mem_ctl.sv:54:- output logic ifu_ic_mb_empty, // Continue with normal fetching. This does not mean that miss is finished. design/ifu/el2_ifu_mem_ctl.sv:55:- output logic ic_dma_active , // In the middle of servicing dma request to ICCM. Do not make any new requests. design/ifu/el2_ifu_mem_ctl.sv:56:- output logic ic_write_stall, // Stall fetch the cycle we are writing th