[Collectives] Deprecate active based language

content/collective_intro.tex

@@ -1,21 +1,24 @@
 \emph{Collective routines} are defined as coordinated communication or synchronization
 operations performed by a group of \acp{PE}.
 
-\openshmem provides three types of collective routines:
+\openshmem provides four types of collective routines:
 
 \begin{enumerate}
-\item Collective routines that operate on teams use a team handle parameter to determine
-  which \acp{PE} will participate in the routine, and use resources encapsulated by the team object
-  to perform operations. See Section~\ref{subsec:team} for details on team management.
+    \item Collective routines that operate on teams use a team handle parameter to determine
+    which \acp{PE} will participate in the routine, and use resources encapsulated by the team object
+    to perform operations. See Section~\ref{subsec:team} for details on team management.
 
-\begin{DeprecateBlock}
-\item Collective routines that operate on active sets use a set of parameters to determine
-  which \acp{PE} will participate and what resources are used to perform operations.
-\end{DeprecateBlock}
+    \begin{DeprecateBlock}
+    \item Collective routines that operate on active sets use a set of parameters to determine
+    which \acp{PE} will participate and what resources are used to perform operations.
+
+    \item Collective routines that do not accept active set
+    parameters and, as required, the default context.
+    \end{DeprecateBlock}
 
-\item Collective routines that accept neither team nor active set
-  parameters, which implicitly operate on the world team and, as
-  required, the default context.
+    \item Collective routines that do not accept team
+    parameters, which implicitly operate on the world team and, as
+    required, the default context.
 \end{enumerate}
 
 Concurrent accesses to symmetric memory by an \openshmem collective

content/programming_model_overview.tex

@@ -144,7 +144,7 @@
       data object on another symmetric data object.
   \item \OPR{All-to-All}: All \acp{PE} participating in the routine exchange
       a fixed amount of contiguous or strided data with all other \acp{PE}
-      in the active set.
+      in the team.
 \end{enumerate}
 
 \item \textbf{Mutual Exclusion}

content/shmem_alltoall.tex

@@ -35,17 +35,17 @@
 
 \apiargument{OUT}{dest}{Symmetric address of a data object large enough to receive
     the combined total of \VAR{nelems} elements from each \ac{PE} in the
-    active set.
+    participating \acp{PE}.
     The type of \dest{} should match that implied in the SYNOPSIS section.}
 \apiargument{IN}{source}{Symmetric address of a data object that contains \VAR{nelems}
-    elements of data for each \ac{PE} in the active set, ordered according to
+    elements of data for each \ac{PE} in the participating \acp{PE}, ordered according to
     destination \ac{PE}.
     The type of \source{} should match that implied in the SYNOPSIS section.}
 \apiargument{IN}{nelems}{
-  The number of elements to exchange for each \ac{PE}.
-  For \FUNC{shmem\_alltoallmem}, elements are bytes;
-  for \FUNC{shmem\_alltoall\{32,64\}}, elements are 4 or 8 bytes,
-  respectively.
+    The number of elements to exchange for each \ac{PE}.
+    For \FUNC{shmem\_alltoallmem}, elements are bytes;
+    for \FUNC{shmem\_alltoall\{32,64\}}, elements are 4 or 8 bytes,
+    respectively.
 }
 
 \begin{DeprecateBlock}
@@ -100,6 +100,21 @@
     If \VAR{team} compares equal to \LibConstRef{SHMEM\_TEAM\_INVALID} or is
     otherwise invalid, the behavior is undefined.
 
+    Before any \ac{PE} calls a \FUNC{shmem\_alltoall} routine,
+    the following conditions must be ensured:
+    \begin{itemize}
+    	\item The \VAR{dest} data object on all \acp{PE} in the team is
+    	ready to accept the \FUNC{shmem\_alltoall} data.
+    \end{itemize}
+
+    Upon return from a \FUNC{shmem\_alltoall} routine, the following is true for
+    the local PE:
+    \begin{itemize}
+        \item Its \VAR{dest} symmetric data object is completely updated and the 
+	data has been copied out of the source data object.
+    \end{itemize}
+
+\begin{DeprecateBlock}
     Active-set-based collective routines operate over all \acp{PE} in the active set
     defined by the \VAR{PE\_start}, \VAR{logPE\_stride}, \VAR{PE\_size} triplet.
 
@@ -116,23 +131,26 @@
 
     Before any \ac{PE} calls a \FUNC{shmem\_alltoall} routine,
     the following conditions must be ensured:
+
     \begin{itemize}
-    \item The \VAR{dest} data object on all \acp{PE} in the active set is
-      ready to accept the \FUNC{shmem\_alltoall} data.
-    \item For active-set-based routines, the \VAR{pSync} array
-    on all \acp{PE} in the active set is not still in use from a prior call
-    to a \FUNC{shmem\_alltoall} routine.
+    	\item The \VAR{dest} data object on all \acp{PE} in the active set is
+    	ready to accept the \FUNC{shmem\_alltoall} data.
+    	\item For active-set-based routines, the \VAR{pSync} array
+    	on all \acp{PE} in the active set is not still in use from a prior call
+    	to a \FUNC{shmem\_alltoall} routine.
     \end{itemize}
+
     Otherwise, the behavior is undefined.
 
     Upon return from a \FUNC{shmem\_alltoall} routine, the following is true for
     the local PE:
     \begin{itemize}
-    \item Its \VAR{dest} symmetric data object is completely updated and
-    the data has been copied out of the \VAR{source} data object.
-    \item For active-set-based routines,
-    the values in the \VAR{pSync} array are restored to the original values.
+    	\item Its \VAR{dest} symmetric data object is completely updated and the 
+	data has been copied out of the source data object.
+    	\item For active-set-based routines,
+    	the values in the \VAR{pSync} array are restored to the original values.
     \end{itemize}
+\end{DeprecateBlock}
 }
 
 \apireturnvalues{

content/shmem_alltoalls.tex

@@ -35,10 +35,10 @@
 
 \apiargument{OUT}{dest}{Symmetric address of a data object large enough to receive 
     the combined total of \VAR{nelems} elements from each \ac{PE} in the
-    active set.
+    participating \acp{PE}.
     The type of \dest{} should match that implied in the SYNOPSIS section.}
 \apiargument{IN}{source}{Symmetric address of a data object that contains \VAR{nelems}
-    elements of data for each \ac{PE} in the active set, ordered according to
+    elements of data for each \ac{PE} in the participating \acp{PE}, ordered according to
     destination \ac{PE}.
     The type of \source{} should match that implied in the SYNOPSIS section.}
 \apiargument{IN}{dst}{The stride between consecutive elements of the \dest{}

content/shmem_broadcast.tex

@@ -45,7 +45,7 @@
   respectively.
 }
 \apiargument{IN}{PE\_root}{Zero-based ordinal of the \ac{PE}, with respect to
-    the team or active set, from which the data is copied.}
+    the calling PEs, from which the data is copied.}
 
 \begin{DeprecateBlock}
 
@@ -61,8 +61,7 @@
 \end{apiarguments}
 
 \apidescription{   
-    \openshmem broadcast routines are collective routines over an active set or
-    valid \openshmem team.
+    \openshmem team-based broadcast routines are collective routines over a valid \openshmem team.
     They copy the \source{} data object on the \ac{PE} specified by
     \VAR{PE\_root} to the \dest{} data object on the \acp{PE}
     participating in the collective operation.
@@ -75,66 +74,89 @@
     \item The \dest{} object is updated on all \acp{PE}.
     \item All \acp{PE} in the \VAR{team} argument must participate in
       the operation.
+    \item Only \acp{PE} in the team  may call the routine.  If a
+      \ac{PE} not in the team calls a team-based
+      collective routine, the behavior is undefined.
     \item If \VAR{team} compares equal to \LibConstRef{SHMEM\_TEAM\_INVALID} or is
       otherwise invalid, the behavior is undefined.
     \item \ac{PE} numbering is relative to the team. The specified
       root \ac{PE} must be a valid \ac{PE} number for the team,
       between \CONST{0} and \VAR{N$-$1}, where \VAR{N} is the size of
       the team.
     \end{itemize}
+
+    Before any \ac{PE} calls a broadcast routine, the following
+    conditions must be ensured:
+    \begin{itemize}
+    \item The \dest{} array on all \acp{PE} participating in the broadcast
+      is ready to accept the broadcast data.
+	\end{itemize}
+    Otherwise, the behavior is undefined. 
+
+	Upon return from a team-based broadcast routine, the following are true for the local
+    \ac{PE}:
+    \begin{itemize}
+        \item The \dest{} data object is updated.
+        \item The \source{} data object may be safely reused.
+    \end{itemize}
 
+\begin{DeprecateBlock}
+    \openshmem active-set broadcast routines are collective routines over an active set. 
+    They copy the \source{} data object on the \ac{PE} specified by
+    \VAR{PE\_root} to the \dest{} data object on the \acp{PE}
+    participating in the collective operation.
+    The same \dest{} and \source{} data objects and the same value of
+    \VAR{PE\_root} must be passed by all \acp{PE} participating in the
+    collective operation.
+
     For active-set-based broadcasts:
     \begin{itemize}
-    \item The \dest{} object is updated on all \acp{PE} other than the
-      root \ac{PE}.
-    \item All \acp{PE} in the active set defined by the
-      \VAR{PE\_start}, \VAR{logPE\_stride}, \VAR{PE\_size} triplet
-      must participate in the operation.
-    \item Only \acp{PE} in the active set may call the routine.  If a
-      \ac{PE} not in the active set calls an active-set-based
+        \item The \VAR{dest} object is updated on all PEs other than the root PE.
+        \item All \acp{PE} in the active set defined by the
+        \VAR{PE\_start}, \VAR{logPE\_stride}, \VAR{PE\_size} triplet
+        must participate in the operation.
+       \item Only \acp{PE} in the active set may call the routine.  If a
+       \ac{PE} not in the active set calls an active-set-based
       collective routine, the behavior is undefined.
-    \item The values of arguments \VAR{PE\_root}, \VAR{PE\_start},
+      \item The values of arguments \VAR{PE\_root}, \VAR{PE\_start},
       \VAR{logPE\_stride}, and \VAR{PE\_size} must be the same value
       on all \acp{PE} in the active set.
-    \item The value of \VAR{PE\_root} must be between \CONST{0} and
+      \item The value of \VAR{PE\_root} must be between \CONST{0} and
       \VAR{PE\_size $-$ 1}.
-    \item The same \VAR{pSync} work array must be passed by all \acp{PE}
+      \item The same \VAR{pSync} work array must be passed by all \acp{PE}
       in the active set.
     \end{itemize}
 
-    Before any \ac{PE} calls a broadcast routine, the following
+    Before any \ac{PE} calls a active-set-based broadcast routine, the following
     conditions must be ensured:
     \begin{itemize}
-    \item The \dest{} array on all \acp{PE} participating in the broadcast
-      is ready to accept the broadcast data.
-    \item For active-set-based broadcasts, the
-      \VAR{pSync} array on all \acp{PE} in the
-      active set is not still in use from a prior call to an \openshmem
-      collective routine.
+   	 \item The \dest{} array on all \acp{PE} participating in the broadcast
+         is ready to accept the broadcast data.
+   	 \item The \VAR{pSync} array on all \acp{PE} in the
+         active set is not still in use from a prior call to an \openshmem
+         collective routine.
     \end{itemize}
     Otherwise, the behavior is undefined.
 
-    Upon return from a broadcast routine, the following are true for the local
+	Upon return from an active-based broadcast routine, the following are true for the local
     \ac{PE}:
     \begin{itemize}
-    \item For team-based broadcasts, the \dest{} data object is
-      updated.
-    \item For active-set-based broadcasts:
-      \begin{itemize}
-      \item If the current \ac{PE} is not the root \ac{PE}, the
-        \dest{} data object is updated.
+      \item If the current PE is not the root PE, the \dest{} data object is updated.
+      \item The \source{} data object may be safely reused.
       \item The values in the \VAR{pSync} array are restored to the
         original values.
-      \end{itemize}
-    \item The \source{} data object may be safely reused.
     \end{itemize}
+\end{DeprecateBlock}
 }
 
 
 \apireturnvalues{
   For team-based broadcasts, zero on successful local completion; otherwise, nonzero.
 
+\begin{DeprecateBlock}
   For active-set-based broadcasts, none.
+\end{DeprecateBlock}
+
 }
 
 \apinotes{

content/shmem_collect.tex

@@ -66,15 +66,13 @@
     \openshmem \FUNC{collect} and \FUNC{fcollect} routines perform a collective
     operation to concatenate \VAR{nelems}
     data items from the \source{} array into the
-    \dest{} array, over an \openshmem team or active set
-    in processor number order. The resultant \dest{} array contains the contribution from
+    \dest{} array, over an \openshmem team in processor number order. 
+    The resultant \dest{} array contains the contribution from
     \acp{PE} as follows:
 
     \begin{itemize}
-    \item For an active set, the data from \ac{PE} \VAR{PE\_start} is first, then the
-    contribution from \ac{PE} \VAR{PE\_start} + \VAR{PE\_stride} second, and so on.
-    \item For a team, the data from \ac{PE} number \CONST{0} in the team is first, then the
-    contribution from \ac{PE} \CONST{1} in the team, and so on.
+        \item For a team, the data from \ac{PE} number \CONST{0} in the team is first, then the
+        contribution from \ac{PE} \CONST{1} in the team, and so on.
     \end{itemize}
 
     The collected result is written to the \dest{} array for all \acp{PE}
@@ -90,6 +88,26 @@
     If \VAR{team} compares equal to \LibConstRef{SHMEM\_TEAM\_INVALID} or is
     otherwise invalid, the behavior is undefined.
 
+\begin{DeprecateBlock}
+    \openshmem \FUNC{collect} and \FUNC{fcollect} routines perform a collective
+    operation to concatenate \VAR{nelems}
+    data items from the \source{} array into the
+    \dest{} array, over an \openshmem active set
+    in processor number order. The resultant \dest{} array contains the contribution from
+	\acp{PE} as follows:
+    \begin{itemize}
+        \item For an active set, the data from \ac{PE} \VAR{PE\_start} is first, then the
+   	contribution from \ac{PE} \VAR{PE\_start} + \VAR{PE\_stride} second, and so on.
+    \end{itemize}
+
+    The collected result is written to the \dest{} array for all \acp{PE}
+    that participate in the operation. The same \dest{} and \source{}
+    arrays must be passed by all \acp{PE} that participate in the operation.
+
+    The \FUNC{fcollect} routines require that \VAR{nelems} be the same value in all
+    participating \acp{PE}, while the \FUNC{collect} routines allow \VAR{nelems} to
+    vary from \ac{PE} to \ac{PE}.
+
     Active-set-based collective routines operate over all \acp{PE} in the active set
     defined by the \VAR{PE\_start}, \VAR{logPE\_stride}, \VAR{PE\_size} triplet.
     As with all active-set-based collective routines,
@@ -108,16 +126,23 @@
     \item For active-set-based collective routines, the values in the \VAR{pSync} array are
     restored to the original values.
     \end{itemize}
+\end{DeprecateBlock}
 }
 
 \apireturnvalues{
     Zero on successful local completion. Nonzero otherwise.
 }
 
 \apinotes{
+\begin{DeprecateBlock}
     The collective routines operate on active \ac{PE} sets that have a
     non-power-of-two \VAR{PE\_size} with some performance degradation.  They operate
     with no performance degradation when \VAR{nelems} is a non-power-of-two value.
+\end{DeprecateBlock}
+    The collective routines that operate on teams containing a
+    non-power-of-two of PEs do so with some performance degradation. They operate
+    with no performance degradation when \VAR{nelems} is a non-power-of-two value.
+
 }
 
 \begin{apiexamples}