add tool file

demo/tools/pump_demo_M5.py

@@ -0,0 +1,76 @@
+#!/usr/bin/python3
+
+# This code is suitable for the use of the myCobot 
+# series product pump provided by Elephant Robotics;
+# Please check the instructions for use of the 
+# suction pump before use, please refer to here:
+# https://docs.elephantrobotics.com/docs/gitbook-en/2-serialproduct/2.7-accessories/2.7.4-pump.html 
+# Running this code requires installing the 'pymycobot' 
+# driver library and python driver environment. 
+# If you don't installed, please refer to here :
+# https://docs.elephantrobotics.com/docs/gitbook-en/7-ApplicationBasePython/
+
+# import library
+from pymycobot import MyCobot               #import mycobot library,if don't have, first 'pip install pymycobot'
+import time
+
+# if use PC and M5 control
+mc = MyCobot('COM9', 115200)                 # WINDOWS use ，need check port number when you PC
+# mc = MyCobot('/dev/ttyUSB0',115200)        #VM linux use
+
+#init robot
+mc.power_on()
+time.sleep(1)
+
+#define pump pin and work state
+pump_motor_pin = 5                           # control vacuum pump motor work pin, can be modified
+pump_relay_pin = 2                           # control vacuum pump relay work pin, can be modified
+pump_open = 0                                # control vacuum pump motor work turn on
+pump_close = 1                               # control vacuum pump motor work turn off
+
+#define api, If you are using the first generation or 
+#earlier suction pump, then define his interface as follows:
+def pump_V1_on():
+    mc.set_basic_output(pump_motor_pin, pump_open)
+    time.sleep(0.05)
+    mc.set_basic_output(pump_relay_pin, pump_open)
+    time.sleep(0.05)
+
+def pump_V1_off():
+    mc.set_basic_output(pump_motor_pin, pump_close)
+    time.sleep(0.05)
+    mc.set_basic_output(pump_relay_pin, pump_close)
+    time.sleep(0.05)
+
+#If you are using the suction pump V2.0 version of 
+# the device, then define his interface as follows:
+def pump_V2_on():
+    mc.set_basic_output(pump_motor_pin, pump_open)
+    time.sleep(0.05)
+
+def pump_V2_off():
+    mc.set_basic_output(pump_motor_pin, pump_close)
+    time.sleep(0.05)
+    mc.set_basic_output(pump_relay_pin, pump_open)
+    time.sleep(1)
+    mc.set_basic_output(pump_relay_pin, pump_close)
+    time.sleep(0.05)
+
+
+# demo control, First turn on the vacuum pump motor, 
+# Then turn off the motor and turn on the relay to 
+# introduce air.If you do not know the version of 
+# your suction pump, please use it after checking 
+# the instructions of the suction pump;
+
+# define pump V1.0 work demo
+# for i in range (5):
+#     pump_V1_on()
+#     time.sleep(5)
+#     pump_V1_off()
+
+# define pump V2.0 work demo
+for i in range (5):
+    pump_V2_on()
+    time.sleep(5)
+    pump_V2_off()

demo/tools/pump_demo_PI.py

@@ -0,0 +1,88 @@
+#!/usr/bin/python3
+
+# This code is suitable for the use of the myCobot 
+# series product pump provided by Elephant Robotics;
+# Please check the instructions for use of the 
+# suction pump before use, please refer to here:
+# https://docs.elephantrobotics.com/docs/gitbook-en/2-serialproduct/2.7-accessories/2.7.4-pump.html 
+# Running this code requires installing the 'pymycobot' 
+# driver library and python driver environment. 
+# If you don't installed, please refer to here :
+# https://docs.elephantrobotics.com/docs/gitbook-en/7-ApplicationBasePython/
+
+# import library
+from pymycobot import MyCobot               #import mycobot library,if don't have, first 'pip install pymycobot'
+import time
+import RPi.GPIO as GPIO
+GPIO.setmode(GPIO.BCM)
+# if use Pi control
+mc = MyCobot('/dev/ttyAMA0',1000000)        #linux use
+
+#init robot
+mc.power_on()
+time.sleep(1)
+
+#define pump pin and work state
+pump_motor_pin = 20                           # control vacuum pump motor work pin, can be modified
+pump_relay_pin = 21                           # control vacuum pump relay work pin, can be modified
+pump_open = 0                                # control vacuum pump motor work turn on
+pump_close = 1                               # control vacuum pump motor work turn off
+
+def init_gpio(io_number, state):
+    if state == 0:
+        st = GPIO.OUT
+    elif state == 1:
+        st = GPIO.IN
+    GPIO.setup(io_number, st)
+
+def init_pump_pin():
+    init_gpio(pump_motor_pin,0)
+    init_gpio(pump_relay_pin,0)
+#define api, If you are using the first generation or 
+#earlier suction pump, then define his interface as follows:
+def pump_V1_on():
+    GPIO.output(pump_motor_pin, pump_open)
+    time.sleep(0.05)
+    GPIO.output(pump_relay_pin, pump_open)
+    time.sleep(0.05)
+
+def pump_V1_off():
+    GPIO.output(pump_motor_pin, pump_close)
+    time.sleep(0.05)
+    GPIO.output(pump_relay_pin, pump_close)
+    time.sleep(0.05)
+
+#If you are using the suction pump V2.0 version of 
+# the device, then define his interface as follows:
+def pump_V2_on():
+    GPIO.output(pump_motor_pin, pump_open)
+    time.sleep(0.05)
+
+def pump_V2_off():
+    GPIO.output(pump_motor_pin, pump_close)
+    time.sleep(0.05)
+    GPIO.output(pump_relay_pin, pump_open)
+    time.sleep(1)
+    GPIO.output(pump_relay_pin, pump_close)
+    time.sleep(0.05)
+
+# demo control, First turn on the vacuum pump motor, 
+# Then turn off the motor and turn on the relay to 
+# introduce air.If you do not know the version of 
+# your suction pump, please use it after checking 
+# the instructions of the suction pump;
+
+# define pump V1.0 work demo
+# for i in range (5):
+#     pump_V1_on()
+#     time.sleep(5)
+#     pump_V1_off()
+
+# define pump V2.0 work demo
+init_pump_pin()
+for i in range (5):
+    pump_V2_on()
+    time.sleep(5)
+    pump_V2_off()
+
+