v0.24
CHANGELOG
General Info
Binaries for each configuration and PCB design are at the end of this page.
- For Raspberry Pi Pico (RP2040) you need to download the .uf2 files starting with pico_.
- For Raspberry Pi Pico w (rp2040) you can download the .uf2 files starting with pico_w_. Although you can also use the pico_ binaries on the Pico w if you don't mind the blinking led.
- For Raspberry Pi Pico 2 (w) (RP2350) you need to download the .uf2 files starting with pico2_ or pico2_riscv_ for Risc-V.
Note
There is no specific build for the Pico 2 w because of issues with the display when blinking the led. Use the pico2_ binaries instead. There is no blinking led on the Pico 2 w.
See setup section in readme how to install and wire up
3D-printed case design for PCB: https://www.thingiverse.com/thing:6689537.
For the latest two player PCB 2.0, you need:
- Top_v2.0_with_Bootsel_Button.stl. This allows for software upgrades without removing the cover. (*)
- Base_v2.0.stl
- Power_Switch.stl.
(*) in case you don't want to access the bootsel button on the Pico, you can choose Top_v2.0.stl
3D-printed case design for Waveshare RP2040-PiZero: https://www.thingiverse.com/thing:6758682
v0.24 release notes
Features
- Menu now uses the full screen resolution of 320x240 pixels resulting in a 40x30 character display in stead of 32x29.
Fixes
- Menu now displaying correctly on Pico2 Risc-V builds.
All changes are in the pico_shared submodule. When building from source, make sure you do a git submodule update --init from within the source folder to get the latest pico_shared module.
Note
Since V0.23 an issue was introduced with the nes controller ports on the Waveshare RP2040-PiZero. To fix this, it is replaced with a patched version: pico_piconesPlusWsRP2040PiZeroXX.uf2 (see also #8 in pico_shared)