Compiling and building the firmware

This tutorial is a reference to compile, build and flash the firmware of the OBDH module. Before start, verify if all Toolchain steps was correctly done. After this, follow the Power-On steps.

In case of power-on through PC104, connect the OBDH board with a MSP-FET. Use the P1 jumper in the JTAG position and keep the P7 jumper in the PC104 position. After this, plug it in the computer. Otherwise, if the OBDH was power-on through JTAG, this step is alredy done.

Then, with the project opened in the CCS, click in the Debug button (green bug icon) or press F11 to upload the code into the OBDH board.