tests: Wait for new ovn-controllers to connect to Southbound.

Simulated chassis are added with ovn_attach(), ovn_az_attach() and start_virtual_controller(). Wait for ovn-controllers to register in the Southbound (create their Encap record) before continuing. That's required because 'ovn-nbctl --wait=hv sync' (used throughout the test suite) has different semantics if no chassis is registered in the Southbound. In those cases the command is equivalent to 'ovn-nbctl --wait=sb sync'. This was causing a race condition due to which CI would occasionally fail because of missing OpenFlows, e.g.: https://github.com/ovsrobot/ovn/actions/runs/6471719045/job/17570941948#step:8:4849 Co-authored-by: Xavier Simonart <[email protected]> Signed-off-by: Xavier Simonart <[email protected]> Signed-off-by: Dumitru Ceara <[email protected]> Acked-by: Mark Michelson <[email protected]> Reviewed-By: Ihar Hrachyshka <[email protected]>
ovn-org · Oct 12, 2023 · 0b512d7 · 0b512d7
1 parent 5efdf01
commit 0b512d7
Show file tree

Hide file tree

Showing 2 changed files with 47 additions and 6 deletions.
diff --git a/tests/ovn-macros.at b/tests/ovn-macros.at
@@ -288,11 +288,44 @@ net_attach () {
         || return 1
 }
 
+ovn_wait_for_encaps() {
+    local systemid=$1
+
+    if [[ -f "${OVN_SYSCONFDIR}/system-id-override" ]]; then
+        systemid=$(cat ${OVN_SYSCONFDIR}/system-id-override)
+    fi
+
+    local encap=$(ovs-vsctl get Open_vSwitch . external_ids:ovn-encap-type-$systemid)
+    if [[ -z "$encap" ]]; then
+        encap=$(ovs-vsctl get Open_vSwitch . external_ids:ovn-encap-type)
+    fi
+    encap=$(tr -d '"' <<< $encap)
+
+    local ip=$(ovs-vsctl get Open_vSwitch . external_ids:ovn-encap-ip-$systemid)
+    if [[ -z "$ip" ]]; then
+        ip=$(ovs-vsctl get Open_vSwitch . external_ids:ovn-encap-ip)
+    fi
+    ip=$(tr -d '"' <<< $ip)
+
+    IFS="," read -r -a encap_types <<< "$encap"
+    for e in "${encap_types[[@]]}"; do
+        wait_column "$ip" sb:Encap ip chassis_name="$systemid" type="$e"
+    done
+}
+
 # ovn_az_attach AZ NETWORK BRIDGE IP [MASKLEN] [ENCAP]
 ovn_az_attach() {
-    local az=$1 net=$2 bridge=$3 ip=$4 masklen=${5-24} encap=${6-geneve,vxlan} systemid=${7-$sandbox} cli_args=${@:8}
+    local az=$1 net=$2 bridge=$3 ip=$4 masklen=${5-24} encap=${6-geneve,vxlan}
+    local systemid=${7-$sandbox} systemid_override=$8
     net_attach $net $bridge || return 1
 
+    local expected_encap_id=$systemid
+    local cli_args=""
+    if [[ -n "$systemid_override" ]]; then
+        cli_args="-n $systemid_override"
+        expected_encap_id=$systemid_override
+    fi
+
     mac=`ovs-vsctl get Interface $bridge mac_in_use | sed s/\"//g`
     arp_table="$arp_table $sandbox,$bridge,$ip,$mac"
     if test -z $(echo $ip | sed '/:/d'); then
@@ -332,6 +365,11 @@ ovn_az_attach() {
     fi
 
     start_daemon ovn-controller --enable-dummy-vif-plug ${cli_args} || return 1
+    if test X"$az" = XNONE; then
+        ovn_wait_for_encaps $expected_encap_id
+    else
+        ovn_as $az ovn_wait_for_encaps $expected_encap_id
+    fi
 }
 
 # ovn_attach NETWORK BRIDGE IP [MASKLEN] [ENCAP]
@@ -372,6 +410,7 @@ start_virtual_controller() {
         || return 1
 
     ovn-controller --enable-dummy-vif-plug ${cli_args} -vconsole:off --detach --no-chdir
+    ovn_wait_for_encaps $systemid
 }
 
 # ovn_setenv AZ

diff --git a/tests/ovn.at b/tests/ovn.at
@@ -27936,8 +27936,9 @@ ovn-nbctl ls-add ls1
 ovn-nbctl --wait=sb lsp-add ls1 lsp1
 
 # Simulate the fact that lsp1 had been previously bound on hv1.
-ovn-sbctl --id=@e create encap chassis_name=hv1 ip="192.168.0.1" type="geneve" \
-    -- --id=@c create chassis name=hv1 encaps=@e \
+ovn-sbctl --id=@e1 create encap chassis_name=hv1 ip="192.168.0.1" type="geneve" \
+    --id=@e2 create encap chassis_name=hv1 ip="192.168.0.1" type="vxlan" \
+    -- --id=@c create chassis name=hv1 encaps=@e1,@e2 \
     -- set Port_Binding lsp1 chassis=@c
 
 as hv1
@@ -27963,8 +27964,9 @@ ovn-nbctl ls-add ls1
 ovn-nbctl --wait=sb lsp-add ls1 lsp1
 
 # Simulate the fact that lsp1 had been previously bound on hv1.
-ovn-sbctl --id=@e create encap chassis_name=hv1 ip="192.168.0.1" type="geneve" \
-    -- --id=@c create chassis hostname=hv1 name=hv1 encaps=@e \
+ovn-sbctl --id=@e1 create encap chassis_name=hv1 ip="192.168.0.1" type="geneve" \
+    --id=@e2 create encap chassis_name=hv1 ip="192.168.0.1" type="vxlan" \
+    -- --id=@c create chassis name=hv1 encaps=@e1,@e2 \
     -- set Port_Binding lsp1 chassis=@c
 
 as hv1
@@ -35745,7 +35747,7 @@ as hv1 ovs-vsctl set-ssl \
 echo hv3 > ${OVN_SYSCONFDIR}/test_hv
 
 # the last argument is passed to ovn-controller through cli
-ovn_attach n1 br-phys 192.168.0.1 24 vxlan hv1 -n hv3
+ovn_attach n1 br-phys 192.168.0.1 24 vxlan hv1 hv3
 
 sim_add hv2
 as hv2