Deployment profile testing with BATS

.github/workflows/test.yaml

@@ -21,6 +21,6 @@ jobs:
     - run: npm run build
     - run: npm run lint:nofix
     - name: Install shfmt
-      run: go install mvdan.cc/sh/v3/cmd/shfmt@v3.6.0
+      run: go install mvdan.cc/sh/v3/cmd/shfmt@v3.7.0
     - run: make -C bats lint
     - run: npm test

bats/Makefile

@@ -9,9 +9,8 @@ containers:
 # https://www.shellcheck.net/wiki/SC1091 -- Not following: xxx was not specified as input (see shellcheck -x)
 # https://www.shellcheck.net/wiki/SC2034 -- xxx appears unused. Verify use (or export if used externally)
 # https://www.shellcheck.net/wiki/SC2154 -- xxx is referenced but not assigned
-# https://www.shellcheck.net/wiki/SC2155 -- Declare and assign separately to avoid masking return values
 
-SC_EXCLUDES ?= SC1091,SC2034,SC2154,SC2155
+SC_EXCLUDES ?= SC1091,SC2034,SC2154
 
 .PHONY: lint
 lint:

bats/tests/containers/factory-reset.bats

@@ -1,6 +1,4 @@
 load '../helpers/load'
-assert=assert
-refute=refute
 
 @test 'factory reset' {
     factory_reset
@@ -156,20 +154,6 @@ rdctl_factory_reset() {
     fi
 }
 
-refute_failure() {
-    assert_success
-}
-
-refute_not_exists() {
-    assert_exists "$@"
-}
-
-before() {
-    assert=refute
-    refute=assert
-    "$@"
-}
-
 check_directories() {
     # Check if all expected directories are created after starting application/ are deleted after a factory reset
     delete_dir=("$PATH_APP_HOME" "$PATH_CONFIG")

bats/tests/extensions/allow-list.bats

@@ -12,7 +12,7 @@ local_setup() {
 }
 
 write_allow_list() { # list
-    local list=${1-}
+    local list=${1:-}
     local allowed=true
 
     if [ -z "$list" ]; then

bats/tests/extensions/containers.bats

@@ -97,7 +97,8 @@ encoded_id() { # variant
 }
 
 @test 'compose - with a long name' {
-    local name="$(id vm-compose)-with-an-unusually-long-name-yes-it-is-very-long"
+    local name
+    name="$(id vm-compose)-with-an-unusually-long-name-yes-it-is-very-long"
 
     ctrctl tag "$(id vm-compose)" "$name"
     rdctl extension install "$name"

bats/tests/extensions/install.bats

@@ -17,8 +17,9 @@ assert_file_contents_equal() { # $have $want
     assert_file_exist "$have"
     assert_file_exist "$want"
 
-    local have_hash="$(md5sum "$have" | cut -d ' ' -f 1)"
-    local want_hash="$(md5sum "$want" | cut -d ' ' -f 1)"
+    local have_hash want_hash
+    have_hash="$(md5sum "$have" | cut -d ' ' -f 1)"
+    want_hash="$(md5sum "$want" | cut -d ' ' -f 1)"
     if [ "$have_hash" != "$want_hash" ]; then
         printf "expected : %s (%s)\nactual   : %s (%s)" \
             "$want" "$want_hash" "$have" "$have_hash" |

bats/tests/helpers/commands.bash

@@ -14,12 +14,6 @@ else
     CONTAINER_ENGINE_SERVICE=docker
 fi
 
-if is_unix; then
-    RC_SERVICE=rc-service
-elif is_windows; then
-    RC_SERVICE=wsl-service
-fi
-
 if is_macos; then
     CRED_HELPER="$PATH_RESOURCES/$PLATFORM/bin/docker-credential-osxkeychain"
 elif is_linux; then
@@ -86,6 +80,3 @@ rdshell() {
 rdsudo() {
     rdshell sudo "$@"
 }
-rc_service() {
-    rdsudo "$RC_SERVICE" "$@"
-}

bats/tests/helpers/defaults.bash

@@ -55,13 +55,28 @@ using_ghcr_images() {
     is_true "$RD_USE_GHCR_IMAGES"
 }
 
+########################################################################
+: "${RD_DELETE_PROFILES:=true}"
+
+deleting_profiles() {
+    is_true "$RD_DELETE_PROFILES"
+}
+
 ########################################################################
 : "${RD_USE_IMAGE_ALLOW_LIST:=false}"
 
 using_image_allow_list() {
     is_true "$RD_USE_IMAGE_ALLOW_LIST"
 }
 
+########################################################################
+# RD_USE_PROFILE is for internal use. It uses a profile instead of
+# settings.json to set initial values for WSL integrations and allowed
+# images list because when settings.json exists the default profile is
+# ignored.
+
+: "${RD_USE_PROFILE:=false}"
+
 ########################################################################
 : "${RD_USE_VZ_EMULATION:=false}"
 
@@ -96,7 +111,7 @@ if using_networking_tunnel && ! is_windows; then
 fi
 
 ########################################################################
-if ! is_unix && [ -n "${RD_MOUNT_TYPE-}" ]; then
+if ! is_unix && [ -n "${RD_MOUNT_TYPE:-}" ]; then
     fatal "RD_MOUNT_TYPE only works on Linux and macOS"
 fi
 
@@ -126,6 +141,10 @@ validate_enum RD_9P_PROTOCOL_VERSION 9p2000 9p2000.u 9p2000.L
 
 validate_enum RD_9P_SECURITY_MODEL passthrough mapped-xattr mapped-file none
 
+########################################################################
+# Use RD_PROTECTED_DOT in profile settings for WSL distro names
+: "${RD_PROTECTED_DOT:=·}"
+
 ########################################################################
 # RD_LOCATION specifies the location where Rancher Desktop is installed
 #   system: default system-wide install location shared for all users

bats/tests/helpers/load.bash

@@ -47,6 +47,9 @@ source "$PATH_BATS_HELPERS/paths.bash"
 # and PATH_* variables from paths.bash
 source "$PATH_BATS_HELPERS/commands.bash"
 
+# profile.bash uses is_xxx() from os.bash
+source "$PATH_BATS_HELPERS/profile.bash"
+
 # vm.bash uses various PATH_* variables from paths.bash,
 # rdctl from commands.bash, and jq_output from utils.bash
 source "$PATH_BATS_HELPERS/vm.bash"
@@ -59,7 +62,8 @@ export PATH="$PATH_BATS_ROOT/bin/${OS/windows/linux}:$PATH"
 
 # If called from foo() this function will call local_foo() if it exist.
 call_local_function() {
-    local func="local_$(calling_function)"
+    local func
+    func="local_$(calling_function)"
     if [ "$(type -t "$func")" = "function" ]; then
         eval "$func"
     fi
@@ -74,14 +78,14 @@ setup_file() {
 }
 
 teardown_file() {
-    call_local_function
-
     capture_logs
 
-    # On Linux & Windows if we don't shutdown Rancher Desktop bats test don't terminate
+    # On Linux & Windows if we don't shutdown Rancher Desktop bats tests don't terminate
     if is_linux || is_windows; then
         run rdctl shutdown
     fi
+
+    call_local_function
 }
 
 setup() {
@@ -95,9 +99,9 @@ setup() {
 }
 
 teardown() {
-    call_local_function
-
     if [ -z "$BATS_TEST_SKIPPED" ] && [ -z "$BATS_TEST_COMPLETED" ]; then
         take_screenshot
     fi
+
+    call_local_function
 }

bats/tests/helpers/os.bash

@@ -23,23 +23,23 @@ Linux)
 esac
 
 is_linux() {
-    if [ -z "${1-}" ]; then
+    if [ -z "${1:-}" ]; then
         test "$OS" = linux
     else
         test "$OS" = linux -a "$ARCH" = "$1"
     fi
 }
 
 is_macos() {
-    if [ -z "${1-}" ]; then
+    if [ -z "${1:-}" ]; then
         test "$OS" = darwin
     else
         test "$OS" = darwin -a "$ARCH" = "$1"
     fi
 }
 
 is_windows() {
-    if [ -z "${1-}" ]; then
+    if [ -z "${1:-}" ]; then
         test "$OS" = windows
     else
         test "$OS" = windows -a "$ARCH" = "$1"