-
Notifications
You must be signed in to change notification settings - Fork 230
L4T R32.7.1 Notes
As of 18 Mar 2022, the master branch supports L4T R32.7.1/JetPack 4.6.1.
As of 08 Apr 2022, the dunfell branch also supports L4T R32.7.1/JetPack 4.6.1.
NVIDIA documentation:
- R32.7.1 adds support for the 64GB Jetson AGX Xavier and 16GB Jetson Xavier NX modules. These should be supported without modifying any machine configuration files, although (as of this writing) that has not been tested.
The flash layout XML files for the Jetson AGX Xavier Industrial module has been changed to add a second badpage partition. Since there is no support yet for that module in meta-tegra, that should not affect any current users.
The security engine driver has been enhanced to provide hwrng device to the kernel, which can be used with the rng-tools entropy gatherer (for t186/t194 only). Recipes to enable this on TX2 and Xavier platforms have been added to the meta-tegra-community repo.
NVIDIA modified the kernel firmware loader in a way that causes significant delays with the default kernel configuration, which enables the long-deprecated userland helper interface for firmware loading. Disabling CONFIG_FW_LOADER_USER_HELPER and CONFIG_FW_LOADER_USER_HELPER_FALLBACK fixes the delay, and this is done by default in the kernel recipe.
The U-Boot in L4T R32.7.1 remains at U-Boot v2020.04, with added patches from NVIDIA. In this layer we continue to track the upstream OE-Core U-Boot recipes in each branch, porting NVIDIA patches to our fork of the upstream U-Boot repository.
Note that unlike NVIDIA, our U-Boot fork uses a separate build configuration for the SDcard-based Nano (sku 0000) and the eMMC production Nano (sku 0002), so patches related to supporting both in the same build have not been applied.
On t210 platforms, U-Boot is now responsible for loading the XUSB controller firmware; it is not loaded by cboot.
cboot on the t186/t194 platforms added a new "unified" A/B redundancy mode that associates a bootloader slot with a rootfs slot. For OE4T, this is equivalent to the "user" redundancy mode that we were already using.
JetPack 4.6.1 includes the following updates:
- VPI 1.2.3
- TensorRT 8.2.1
The DeepStream SDK has been updated from 6.0.0 to 6.0.1 for compatibility with the updated L4T/JetPack. The DeepStream recipes are in the meta-tegra-community repo.