Skip to content
This repository has been archived by the owner on Oct 2, 2024. It is now read-only.

installing

Jump to bottom
J.Rios edited this page May 4, 2019 · 1 revision

This section need to be updated completelly. Please read instructions in the discussions.

Installing Guayadeque

You can install Guayadeque from different sources. You can install from a PPA (Personal Package Archives), from source code directly, from subversion repository or from your distribution package. We are going to cover only the ones we support :

Installing from PPA :

This is the easiest method to install Guayadeque as you only need to add the source of the repository and use your preferred package manager to add the program. If you want to do it from the command line you just need to do

sudo add-apt-repository ppa:anonbeat/guayadeque
sudo apt-get update
sudo apt-get install guayadeque

Installing from git :

Why install from git? Because the git provides the most up to date version with the latest corrections and improvements made by the developer. This way you can help by testing and providing bug reports to the ongoing project. However, be aware that this is a bleeding-edge version that can sometimes introduce new bugs.

The first step we need to do is install the development tools we will use to build the executable. To do so, open a terminal and type 

sudo apt-get install git build-essential cmake gettext

Once this have been installed we need to install the development dependencies needed by Guayadeque.To install them you need to run 

sudo apt-get install libwxgtk3.0-dev libtag1-dev libwxsqlite3-3.0-dev libsqlite3-dev
sudo apt-get install libcurl4-openssl-dev libdbus-1-dev libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev libgpod-dev libindicate-dev

Now we can grab the source code and start building the project. To do so run in the terminal: 

cd
git clone https://github.com/anonbeat/guayadeque.git
cd guayadeque
./build
sudo make install
Note: If you want to build a debug version instead of run ./build you need to run ./buildd

From time to time you may want to update the git code to the latest version in development. To do it you must do : 

cd ~/guayadeque
git pull
./build
sudo make install

If you want to know what changes have been done in the git repository you can do : 

cd ~/guayadeque
git log

From Source Code :

The process to install it from source code is almost the same as the svn method, but you have to obtain the source code from the Guayadeque download page and save it somewhere in your hard disk.

Once the file is on your hard disk you need to decompress the file. For that you can use 

tar xfvz guayadeque-x.x.x.tar.gz

Note: Need to replace x.x.x with the correct version.

Before you can build it you need to install the dependencies. To do so just run from your command line 

sudo apt-get install build-essential cmake gettext
sudo apt-get install libwxgtk2.8-dev libtagc0-dev libsqlite3-dev libcurl4-openssl-dev libdbus-1-dev libgstreamer0.10-dev libflac-dev libgpod-dev libwxsqlite3-2.8-dev

Now it is time to compile the code. To do it go to the directory where the source code was extracted and run 

./build
sudo make install

Installing from Ubuntu Repository :

This is the easiest method as you only need to search for the guayadeque package and select install or if you prefer from console run

sudo apt-get install guayadeque

Installing in Arch Linux :

Guayadeque is not currently in the official Arch repositories. You have to install it from the AUR by running the following from terminal:

yaourt -S guayadeque

To install from SVN

yaourt -S guayadeque-svn

To remove Guayadeque run this in terminal

yaourt -R guayadeque

or

yaourt -R guayadeque-svn

You can find Guayadeque in the AUR here

Installing in Gentoo Linux :

Guayadeque is available in the main portage tree. For installation you first have to unmask the package. 
echo "media-sound/guayadeque ~*" >> /etc/portage/package.accept_keywords

Now we are ready for installation:

emerge -av guayadeque

If you want the latest SVN you first have to check if layman is already installed:

emerge -av layman

Now you can add the overlay which contains an ebuild for the SVN-version:

layman -a dauleet

Installation as above by:

emerge -av guayadeque

For IPod support add the appropriate useflag before emerging:

echo "media-sound/guayadeque ipod" >> /etc/portage/package.use

Installing in Magiea

Go to the package manager & install

Subversion
task-c++-devel

the dependencies: run the below on a terminal

urpmi cmake wxGTK-devel sqlite3-devel libxml2-devel taglib-devel curl-devel libmp4v2-devel libflac-devel libdbus-1-devel libgstreamer-devel imagemagick libgpod-devel libindicate-devel

download the source tarball http://sourceforge.net/projects/guayadeque/files/guayadeque/0.3.1/guayadeque-0.3.1.tar.bz2/download

Extract/uncompress the source files

run on a terminal as root

su

[enter password] change directories[cd] to wherever the uncompressed files are once there run

cmake .
make
make install

Guayadeque is then ready to use open set path to library enjoy

Installing in Fedora Linux :

Guayadeque is not yet available in the Fedora repositories. You can install Guayadeque by building from source code or via SVN following the instructions at the top of this page. The dependencies listed there use Debian/Ubuntu package names though, so you will first need to install the dependencies using YUM.

Open a terminal and become root by entering the following.

su
your_password

Now install the packages needed for building software from source by entering

yum groupinstall "Development Tools"

Now install the rest of the packages needed to build Guayadeque. Copy the following and paste into your terminal.

yum install cmake gcc-c++ gettext wxGTK wxGTK-devel taglib-devel sqlite-devel libcurl-devel openssl-devel dbus-devel
gstreamer-devel flac-devel libgpod-devel subversion subversion-libs

You are now ready to build Guayadeque by following the instructions at the top of this page using SVN or by directly downloading the source code. In either case, skip the section on dependencies. During the build process, you may notice an error complaining that libindicate was not found. This is a package for the Ubuntu message window. Guayadeque will build and run fine on Fedora without it.

Now we have Guayadeque built and installed in our system. To start it go to Applications > Sound & Video > Guayadeque Music Player.

Guayadeque Music Player

Clone this wiki locally