feat(lane_change_module): add update paramter function for non defined paramters

[kyoichi-sugahara]

Description

In the original implementation, while some parameters could be updated through ros2 param set and affected the behavior, other parameters did not influence the behavior despite being updated.
However, since both the output and ros2 param dump results showed the changes, developers might have believed they had modified parameters when in fact the changes weren't affecting the system. This could cause issues during parameter tuning.

To address this, I've modified the implementation to ensure all parameters can affect the behavior through the updateParam function, making the runtime parameter updates consistent and effective.

• This PR adds functionality to dynamically update additional parameters in the lane change module
• Also fixed min_lane_changing_velocity parameter path

I removed the intermediate variables since they appeared redundant, but I don't fully understand why they were implemented in the original code.
If these intermediate variables served a specific purpose (e.g., validation, safety checks, or compatibility), I will revert these changes.

How was this PR tested?

set paramter with following command with attached script

ros2 param set /planning/scenario_planning/lane_driving/behavior_planning/behavior_path_planner lane_change.<newly_added_parameter_name> <parameter_value>

set_lane_change_param.zip

And got following output

output

$ ./set_lane_change_param.sh 
Setting lane_change.min_length_for_turn_signal_activation to 1.0
Set parameter successful: success
---
Setting lane_change.collision_check.enable_for_prepare_phase.general_lanes to true
Set parameter successful: success
---
Setting lane_change.collision_check.enable_for_prepare_phase.intersection to true
Set parameter successful: success
---
Setting lane_change.collision_check.enable_for_prepare_phase.turns to true
Set parameter successful: success
---
Setting lane_change.collision_check.check_current_lanes to true
Set parameter successful: success
---
Setting lane_change.collision_check.check_other_lanes to true
Set parameter successful: success
---
Setting lane_change.collision_check.use_all_predicted_paths to true
Set parameter successful: success
---
Setting lane_change.collision_check.prediction_time_resolution to 0.5
Set parameter successful: success
---
Setting lane_change.collision_check.yaw_diff_threshold to 0.785
Set parameter successful: success
---
Setting lane_change.safety_check.execution.longitudinal_distance_min_threshold to 3.0
Set parameter successful: success
---
Setting lane_change.safety_check.execution.longitudinal_velocity_delta_time to 0.5
Set parameter successful: success
---
Setting lane_change.safety_check.execution.expected_front_deceleration to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.execution.expected_rear_deceleration to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.execution.rear_vehicle_reaction_time to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.execution.rear_vehicle_safety_time_margin to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.execution.lateral_distance_max_threshold to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.parked.longitudinal_distance_min_threshold to 3.0
Set parameter successful: success
---
Setting lane_change.safety_check.parked.longitudinal_velocity_delta_time to 0.5
Set parameter successful: success
---
Setting lane_change.safety_check.parked.expected_front_deceleration to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.parked.expected_rear_deceleration to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.parked.rear_vehicle_reaction_time to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.parked.rear_vehicle_safety_time_margin to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.parked.lateral_distance_max_threshold to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.cancel.longitudinal_distance_min_threshold to 3.0
Set parameter successful: success
---
Setting lane_change.safety_check.cancel.longitudinal_velocity_delta_time to 0.5
Set parameter successful: success
---
Setting lane_change.safety_check.cancel.expected_front_deceleration to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.cancel.expected_rear_deceleration to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.cancel.rear_vehicle_reaction_time to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.cancel.rear_vehicle_safety_time_margin to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.cancel.lateral_distance_max_threshold to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.stuck.longitudinal_distance_min_threshold to 3.0
Set parameter successful: success
---
Setting lane_change.safety_check.stuck.longitudinal_velocity_delta_time to 0.5
Set parameter successful: success
---
Setting lane_change.safety_check.stuck.expected_front_deceleration to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.stuck.expected_rear_deceleration to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.stuck.rear_vehicle_reaction_time to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.stuck.rear_vehicle_safety_time_margin to 1.0
Set parameter successful: success
---
Setting lane_change.safety_check.stuck.lateral_distance_max_threshold to 1.0
Set parameter successful: success
---
Setting lane_change.delay_lane_change.enable to true
Set parameter successful: success
---
Setting lane_change.delay_lane_change.check_only_parked_vehicle to true
Set parameter successful: success
---
Setting lane_change.delay_lane_change.min_road_shoulder_width to 0.5
Set parameter successful: success
---
Setting lane_change.delay_lane_change.th_parked_vehicle_shift_ratio to 0.5
Set parameter successful: success
---
Setting lane_change.terminal_path.enable to true
Set parameter successful: success
---
Setting lane_change.terminal_path.disable_near_goal to true
Set parameter successful: success
---
Setting lane_change.terminal_path.stop_at_boundary to true
Set parameter successful: success
---
Parameter setting completed

run planning simulator and lane_change module executed.

Notes for reviewers

None.

Interface changes

None.

Effects on system behavior

None.

[github-actions]

Thank you for contributing to the Autoware project!

🚧 If your pull request is in progress, switch it to draft mode.

Please ensure:

• You've checked our contribution guidelines.
• Your PR follows our pull request guidelines.
• All required CI checks pass before marking the PR ready for review.