Executing Nodegroups
RITE allows users to execute nodegroups stored in the RACK nodegroups store and display the results.
Step 1. Before one can execute nodegroups, one must select a directory as the RACK Project so that the resultant .csv files can be stored there. To do this, right click on a directory from the Project Explorer view and click on Set as RACK Project.
Step 2. Then, navigate to the Nodegroup Info tab and right click on the nodegroup to be executed. Then select Query Nodegroup.
Step 3. In the pop up that appears, select the data graph to query and click on Execute Query Nodegroup.
Step 4. After execution, the results are shown in the Query Results tab. To view the raw .csv files generated, navigate to the newly-created QueryResults directory under the directory that was set as the RACK Project.
Step 1. Users can also delete the nodegroups on RACK by selecting one or more nodegroups, right clicking on any selection, and then selecting Delete Nodegroup(s) button.
Step 2. A pop-up will show the number of nodegroups selected for deletion. Press Ok to delete the selected nodegroups.
Go back to Wiki Home
Copyright (c) 2021-2023 General Electric Company, Galois, Inc.
All Rights Reserved
This material is based upon work supported by the Defense Advanced Research Projects Agency (DARPA) under Contract No. FA8750-20-C-0203.
Any opinions, findings and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the Defense Advanced Research Projects Agency (DARPA).
Distribution Statement "A" (Approved for Public Release, Distribution Unlimited)