Add support for triple-channel INA3221 i2c voltage-and-current sensor #41552
tpwrulestest_sitl_copter.yml
on: pull_request
Matrix: build
build-gcc-heli
2m 23s
Matrix: autotest
Matrix: autotest-heli
Annotations
9 errors and 7 warnings
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6174
vehicle_test_suite.NotAchievedException: Triple-notch peak was higher than single-notch peak -24.952241dB > -27.608974dB
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6185
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6174, in DynamicNotches
|
|
autotest (sitltest-copter-tests2b)
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Triple-notch peak was higher than single-notch peak -24.952241dB > -27.608974dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-1.txt)
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6174
vehicle_test_suite.NotAchievedException: Triple-notch peak was higher than single-notch peak -25.104873dB > -28.053931dB
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6185
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6174, in DynamicNotches
|
|
autotest (sitltest-copter-tests2b)
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Triple-notch peak was higher than single-notch peak -25.104873dB > -28.053931dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-2.txt)
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6161
vehicle_test_suite.NotAchievedException: Double-notch peak was higher than single-notch peak -25.592307dB > -28.102674dB
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6185
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6161, in DynamicNotches
|
|
autotest (sitltest-copter-tests2b)
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Double-notch peak was higher than single-notch peak -25.592307dB > -28.102674dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-3.txt)
|
|
autotest (sitltest-copter-tests1a)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1b)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1e)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1c)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1d)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests2a)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests2b)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
Artifacts
Produced during runtime
| Name | Size | |
|---|---|---|
|
BIN-sitltest-copter-tests1a
|
28 MB |
|
|
BIN-sitltest-copter-tests1b
|
25.6 MB |
|
|
BIN-sitltest-copter-tests1c
|
38.7 MB |
|
|
BIN-sitltest-copter-tests1d
|
46.4 MB |
|
|
BIN-sitltest-copter-tests1e
|
37.9 MB |
|
|
BIN-sitltest-copter-tests2a
|
20 MB |
|
|
BIN-sitltest-copter-tests2b
|
211 MB |
|
|
BIN-sitltest-heli
|
57.8 MB |
|