Add support for triple-channel INA3221 i2c voltage-and-current sensor #41552
Annotations
9 errors and 1 warning
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6174
vehicle_test_suite.NotAchievedException: Triple-notch peak was higher than single-notch peak -24.952241dB > -27.608974dB
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6185
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6174, in DynamicNotches
|
test sitltest-copter-tests2b
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Triple-notch peak was higher than single-notch peak -24.952241dB > -27.608974dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-1.txt)
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6174
vehicle_test_suite.NotAchievedException: Triple-notch peak was higher than single-notch peak -25.104873dB > -28.053931dB
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6185
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6174, in DynamicNotches
|
test sitltest-copter-tests2b
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Triple-notch peak was higher than single-notch peak -25.104873dB > -28.053931dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-2.txt)
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6161
vehicle_test_suite.NotAchievedException: Double-notch peak was higher than single-notch peak -25.592307dB > -28.102674dB
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6185
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6161, in DynamicNotches
|
test sitltest-copter-tests2b
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Double-notch peak was higher than single-notch peak -25.592307dB > -28.102674dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-3.txt)
|
test sitltest-copter-tests2b
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
Loading