-
Notifications
You must be signed in to change notification settings - Fork 99
V0.3 Printer Profiles Other Slicer Settings
Even if you are using a slicer not specifically supported by Octolapse, you can still create a printer profile while retaining all of the features provided by the other slicer types, it just may take a bit longer to figure out what settings to use. Start by selecting 'Other Slicer' from the 'Slicer Type' drop down within your current printer profile.
click to see 'Other Slicer' settings within the Octolapse printer profile
[https://raw.githubusercontent.com/FormerLurker/Octolapse/devel/Extras/Wiki/assets/img/printer_profile_other_slicer.png|alt=Printer Profile - Other Slicer Settings)Controls the retraction distance for Octolapse moves. Also used for 'Extruder State Requirements' quality setting within the snapshot profiles.
The height that Octolapse will lift before moving when 'Lift Before Move' is enabled within the snapshot profile. Also used to detect lifting for use with the 'Trigger on Z-Hop' only snapshot profile setting. If set to 0, lifting and lift detection will be disabled.
Switch all speeds between millimeters per second (mm/sec) and millimeters per minute (mm/min). Note that some rounding will be applied when switching between units due to the floating point math being used.
Determines the movement (travel) and speeds for Octolapse moves. These settings are also used in conjunction with the 'Feature Detection' quality settings within the snapshot profile. These can be used to dramatically increase print quality when using Octolapse.
Determines the retraction speed for Octolapse moves. Also used to detect retraction within the snapshot 'Feature Detection' quality settings.
Determines the deretraction speed for Octolapse moves. Also used to detect deretraction within the snapshot 'Feature Detection' quality settings.
The general printing speed. Also used to detect general printing within the snapshot profile's 'Feature Detection' quality settings.
Determines the z-movement (travel) and speeds for Octolapse lift moves. If 'Lift Before Move' is enabled within the snapshot profile, this speed will be applied to any lift operations. This setting is also used in conjunction with the 'Feature Detection' quality settings within the snapshot profile.
The speed at which perimeters are printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which small perimeters are printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which external perimeters are printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which infill is printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which solid infill is printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which top solid infill is printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which support structures are printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which bridges are printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed used for printing gaps. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which the first layer will print. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which travel moves are made on the first layer. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which skirts and brims will be printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which objects directly above a raft will be printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which an ooze shield will be printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which a prime pillar will be printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
How closely any speed must match the current printer speed in order to match features within the 'Feature Detection' print quality setting within the snapshot profile. Additionally, speeds will be rounded to this number when loading settings from the server.
Octolapse is provided without warranties of any kind. By installing Octolapse you agree to accept all liability for any damage caused directly or indirectly by Octolapse.
Use caution and never leave your printer unattended.