-
Notifications
You must be signed in to change notification settings - Fork 0
Epson Projector Binding
Documentation of the Epson projector binding Bundle
Binding should be compatible with Epson projectors which support ESC/VP21 protocol over serial port.
For installation of the binding, please see Wiki page Bindings.
First of all you need to introduce your Epson projector's in the openhab.cfg file (in the folder '${openhab_home}/configurations').
################################# Epson Projector Binding ######################################
# Serial port of the first Epson projector to control
# epsonprojector:<devId1>.serialPort=
# Serial port of the second Epson projector to control
# epsonprojector:<devId2>.serialPort=
The epsonprojector:<devId1>.serialPort
value is the identification of the serial port on the host system where projector is connected, e.g. "COM1" on Windows, "/dev/ttyS0" on Linux or "/dev/tty.PL2303-0000103D" on Mac.
Examples, how to configure your receiver device:
epsonprojector:hometheater.serialPort=/dev/tty.usbserial
In order to bind an item to the device, you need to provide configuration settings. The easiest way to do so is to add some binding information in your item file (in the folder configurations/items`). The syntax of the binding configuration strings accepted is the following:
epsonprojector="<direction><device-id>:<device-command>[:<update-interval>]"
where <direction>
is one of the following values:
- < - for inbound communication
-
- for outbound communication
-
*
- for either inbound or outbound communication, e.g bi-directional
The <device-id>
corresponds device which is introduced in openhab.cfg.
The <device-command>
corresponds Epson projector command. See complite list below.
The <update-interval>
corresponds update interval of the item. Update interval is only supported by the inbound and bi-directional items. Some of the commands, projector will only response when projector is running. This situation can be handle with special interval, where interval is started with "ON," prefix.
Examples, how to configure your items:
Switch Power { epsonprojector="hometheater:Power:60000" }
String Source { epsonprojector="hometheater:Source:ON,60000" }
Number LampTime { epsonprojector="<hometheater:LampTime:60000" }
Command | Item Type | Purpose | Note |
---|---|---|---|
Power | Switch | ||
PowerState | String | ||
LampTime | Number | ||
KeyCode | Number | ||
VerticalKeystone | Number | ||
HorizontalKeystone | Number | ||
AutoKeystone | Number | ||
AspectRatio | String | ||
Luminance | String | ||
Source | String | ||
DirectSource | Number | ||
Brightness | Number | ||
Contrast | Number | ||
Density | Number | ||
Tint | Number | ||
Sharpness | Number | ||
ColorTemperature | Number | ||
FleshTemperature | Number | ||
ColorMode | String | ||
HorizontalPosition | Number | ||
VerticalPosition | Number | ||
Tracking | Number | ||
Sync | Number | ||
OffsetRed | Number | ||
OffsetGreen | Number | ||
OffsetBlue | Number | ||
GainRed | Number | ||
GainGreen | Number | ||
GainBlue | Number | ||
Gamma | String | ||
GammaStep | Number | ||
Color | String | ||
Mute | Switch | ||
HorizontalReverse | Switch | ||
VerticalReverse | Switch | ||
Background | String | ||
ErrCode | Number | ||
ErrMessage | String |
All information (command list, supported devices, ..) about Epsons ESC/VP21-Protocol can be found here:
http://www.epson.com/cgi-bin/Store/support/supAdvice.jsp?type=highlights¬eoid=184485
and
ftp://download.epson-europe.com/pub/download/3756/epson375633eu.xlsx
epson.items
Switch epsonPower { epsonprojector="hometheater:Power:60000" }
String epsonSource "Source [%s]" { epsonprojector="hometheater:Source:ON,60000" }
Number epsonDirectSource "Direct Source" { epsonprojector="hometheater:DirectSource:ON,60000"}
Switch epsonMute { epsonprojector="hometheater:Mute:ON,60000" }
Switch epsonHorizontalReverse { epsonprojector="hometheater:HorizontalReverse:ON,60000" }
Switch epsonVerticalReverse { epsonprojector="hometheater:VerticalReverse:ON,60000" }
String epsonAspectRatio "AspectRatio [%s]" { epsonprojector="hometheater:AspectRatio:ON,60000" }
String epsonColorMode "ColorMode [%s]" { epsonprojector="hometheater:ColorMode:ON,60000" }
Number epsonColorTemperature "Color Temperature [%d]" <colorwheel> { epsonprojector="<hometheater:ColorTemperature:ON,60000" }
Number epsonLampTime "Lamp Time [%d h]" <switch> { epsonprojector="<hometheater:LampTime:60000" }
Number epsonErrCode "ErrCode [%d]" <"siren-on"> { epsonprojector="<hometheater:ErrCode:ON,60000" }
String epsonErrMessage "ErrMessage [%s]" <"siren-off"> { epsonprojector="<hometheater:ErrMessage:ON,60000" }
epson.sitemap
sitemap epson label="Epson Projector Demo"
{
Frame label="Controls" {
Switch item=epsonPower label="Power"
Text item=epsonSource
Selection item=epsonDirectSource label="DirectSource" mappings=[20="COMPONENT", 32="PC", 48=HDMI1, 160=HDMI2, 65=VIDEO, 66=SVIDEO]
Switch item=epsonMute label="Mute"
}
Frame label="Flip Projection" {
Switch item=epsonHorizontalReverse label="Horizontal Reverse"
Switch item=epsonVerticalReverse label="Vertical Reverse"
}
Frame label="Info" {
Text item=epsonAspectRatio
Text item=epsonColorMode
Text item=epsonColorTemperature
Text item=epsonLampTime
Text item=epsonErrCode
Text item=epsonErrMessage
}
}
###Screenshot:
###Linux / OS X
###Windows
- Cosm Persistence
- db4o Persistence
- Exec Persistence
- InfluxDB Persistence
- JDBC Persistence
- JPA Persistence
- Logging Persistence
- mapdb Persistence
- MongoDB Persistence
- MQTT Persistence
- my.openHAB Persistence
- MySQL Persistence
- rrd4j Persistence
- Sen.Se Persistence
- SiteWhere Persistence
- AlarmDecoder Binding
- Anel Binding
- Arduino SmartHome Souliss Binding
- Asterisk Binding
- Astro Binding
- Autelis Pool Control Binding
- BenQ Projector Binding
- Bluetooth Binding
- Bticino Binding
- CalDAV Binding
- Comfo Air Binding
- Config Admin Binding
- CUL Binding
- CUL Intertechno Binding
- CUPS Binding
- DAIKIN Binding
- Davis Binding
- Denon Binding
- digitalSTROM Binding
- DMX512 Binding
- DSC Alarm Binding
- DSMR Binding
- eBUS Binding
- Ecobee Binding
- EDS OWSever Binding
- eKey Binding
- Energenie Binding
- EnOcean Binding
- Enphase Energy Binding
- Epson Projector Binding
- Exec Binding
- Freebox Binding
- Freeswitch Binding
- Frontier Silicon Radio Binding
- Fritz AHA Binding
- Fritz!Box Binding
- FS20 Binding
- Global Cache IR Binding
- GPIO Binding
- HAI/Leviton OmniLink Binding
- HDAnywhere Binding
- Heatmiser Binding
- Homematic / Homegear Binding
- HTTP Binding
- IEC 62056-21 Binding
- IHC / ELKO Binding
- ImperiHome Binding
- Insteon Hub Binding
- Insteon PLM Binding
- IPX800 Binding
- IRtrans Binding
- jointSPACE-Binding
- KNX Binding
- Koubachi Binding
- LCN Binding
- LightwaveRF Binding
- Leviton/HAI Omnilink Binding
- Lg TV Binding
- Logitech Harmony Hub
- MailControl Binding
- MAX!Cube-Binding
- MAX! CUL Binding
- MiLight Binding
- MiOS Binding
- Modbus TCP Binding
- MPD Binding
- MQTT Binding
- MQTTitude binding
- Neohub Binding
- Nest Binding
- Netatmo Binding
- Network Health Binding
- Network UPS Tools Binding
- Nibe Heatpump Binding
- Nikobus Binding
- Novelan/Luxtronic Heatpump Binding
- NTP Binding
- One-Wire Binding
- Onkyo AV Receiver Binding
- Open Energy Monitor Binding
- OpenPaths presence detection binding
- OpenSprinkler Binding
- OSGi Configuration Admin Binding
- Panasonic TV Bindung
- panStamp Binding
- Philips Hue Binding
- Piface Binding
- pilight Binding
- Pioneer-AVR-Binding
- Plex Binding
- Plugwise Binding
- PLCBus Binding
- Primare Binding
- Pulseaudio Binding
- RFXCOM Binding
- RWE Smarthome Binding
- Sager WeatherCaster Binding
- Samsung AC Binding
- Samsung TV Binding
- Serial Binding
- Sallegra Binding
- Satel Alarm Binding
- Sinthesi Sapp Binding
- Snmp Binding
- Somfy URTSI II Binding
- Sonos Binding
- Squeezebox Binding
- Swegon ventilation Binding
- System Info Binding
- TA CMI Binding
- TCP/UDP Binding
- Tellstick Binding
- TinkerForge Binding
- Tivo Binding
- VDR Binding
- Velleman-K8055-Binding
- Wago Binding
- Wake-on-LAN Binding
- Waterkotte EcoTouch Heatpump Binding
- Weather Binding
- Wemo Binding
- Withings Binding
- XBMC Binding
- xPL Binding
- Yamahareceiver Binding
- Zibase Binding
- Z-Wave Binding
- Asterisk
- Google Calendar
- Linux Media Players
- ROS Robot Operating System
- Telldus Tellstick
- Zoneminder
- Wink Hub (rooted)
- Wink Monitoring
- Transformations
- XSLT
- JSON
- REST-API
- Security
- Service Discovery
- Voice Control
- BritishGasHive-Using-Ruby
- Dropbox Bundle
A good source of inspiration and tips from users gathered over the years. Be aware that things may have changed since they were written and some examples might not work correctly.
Please update the wiki if you do come across any out of date information.
- Comfo Air Binding
- Ecobee Examples
- Nest Examples
- Rollershutter Bindings
- Squeezebox
- WAC Binding
- WebSolarLog
- Alarm Clock
- Convert Farenheit to Celcius
- The mother of all lighting rules
- Reusable Rules via Functions
- Combining different Items
- Items, Rules and more Examples of a SmartHome
- Google Map
- Controlling openHAB with Android
- Usecase examples
- B-Control Manager
- Spell checking for foreign languages
- Flic via Tasker
- Chromecast via castnow