-
Notifications
You must be signed in to change notification settings - Fork 0
Velleman K8055 Binding
This binding allows to use a Velleman k8055 USB IO Board with OpenHab.
This binding makes use of JNI calls to the native k8055 library and thus requires that the native library is available. The binding has been tested on Linux with the open-source libk8055 library. In principle it should also work on Windows with the Velleman provided DLL as it has the same API, however this has not yet been tested.
For the binding to access the native library correctly, the following conditions must be met:
- The library must be installed somewhere in the library search path (in Linux, a system lib directory is fine; on Windows\system32 folder.
- The JVM being used to run openhab must be the same 'bitness' as the library (i.e. 32bit/64bit). If using the Velleman provided Windows DLL, this means running on a 32bit JVM.
Before configuring single items, the global device configuration needs to be set up in the openhab.cfg file.
################################# Velleman K8055 Binding ######################################
# refresh interval in milliseconds (optional, defaults to 1000ms)
#k8055:refresh=1000
# Board Number.
#k8055:boardno=0
The k8055:refresh value is how often the binding should read the state of the hardware inputs.
The k8055:boardno value is which board openhab should connect to. This must be specified to enable the binding. Currently the binding only supports connecting to a single board.
In order to bind an item to the device, you need to provide configuration settings. The easiest way to do so is to add some binding information in your item file (in the folder configurations/items`). The syntax of the binding configuration strings accepted is the following:
k8055="<IO-type>:<IO-number>"
Where
-
IO-type is one of:
-
DIGITAL_IN - Supports Contact Items
-
DIGITAL_OUT - Supports Switch Items
-
ANALOG_IN - Supports Number Items
-
ANALOG_OUT - Supports Dimmer Items
-
IO-number is the number (1-8) of the particular IO channel to bind to.
Switch Output1 "Digital Output 1" { k8055="DIGITAL_OUT:1"}
Switch Output2 "Digital Output 2" { k8055="DIGITAL_OUT:2"}
Dimmer K8055_ANOUT_1 "K8055 Analog Output 1" { k8055="ANALOG_OUT:1"}
Dimmer K8055_ANOUT_2 "K8055 Analog Output 2" { k8055="ANALOG_OUT:2"}
Number K8055_ANIN_1 "K8055 Analog Input 1" { k8055="ANALOG_IN:1" }
Number K8055_ANIN_2 "K8055 Analog Input 2" { k8055="ANALOG_IN:2" }
On some Linux distribution the user openhab is running as may not have permissions to access the USB ports by default. It is worth checking that the standalone command-line program (k8055) that comes with libk8055 works as the relevant user before attempting to use the binding. (Particularly as the driver outputs little useful debugging information to the logs).
###Linux / OS X
###Windows
- Cosm Persistence
- db4o Persistence
- Exec Persistence
- InfluxDB Persistence
- JDBC Persistence
- JPA Persistence
- Logging Persistence
- mapdb Persistence
- MongoDB Persistence
- MQTT Persistence
- my.openHAB Persistence
- MySQL Persistence
- rrd4j Persistence
- Sen.Se Persistence
- SiteWhere Persistence
- AlarmDecoder Binding
- Anel Binding
- Arduino SmartHome Souliss Binding
- Asterisk Binding
- Astro Binding
- Autelis Pool Control Binding
- BenQ Projector Binding
- Bluetooth Binding
- Bticino Binding
- CalDAV Binding
- Comfo Air Binding
- Config Admin Binding
- CUL Binding
- CUL Intertechno Binding
- CUPS Binding
- DAIKIN Binding
- Davis Binding
- Denon Binding
- digitalSTROM Binding
- DMX512 Binding
- DSC Alarm Binding
- DSMR Binding
- eBUS Binding
- Ecobee Binding
- EDS OWSever Binding
- eKey Binding
- Energenie Binding
- EnOcean Binding
- Enphase Energy Binding
- Epson Projector Binding
- Exec Binding
- Freebox Binding
- Freeswitch Binding
- Frontier Silicon Radio Binding
- Fritz AHA Binding
- Fritz!Box Binding
- FS20 Binding
- Global Cache IR Binding
- GPIO Binding
- HAI/Leviton OmniLink Binding
- HDAnywhere Binding
- Heatmiser Binding
- Homematic / Homegear Binding
- HTTP Binding
- IEC 62056-21 Binding
- IHC / ELKO Binding
- ImperiHome Binding
- Insteon Hub Binding
- Insteon PLM Binding
- IPX800 Binding
- IRtrans Binding
- jointSPACE-Binding
- KNX Binding
- Koubachi Binding
- LCN Binding
- LightwaveRF Binding
- Leviton/HAI Omnilink Binding
- Lg TV Binding
- Logitech Harmony Hub
- MailControl Binding
- MAX!Cube-Binding
- MAX! CUL Binding
- MiLight Binding
- MiOS Binding
- Modbus TCP Binding
- MPD Binding
- MQTT Binding
- MQTTitude binding
- Neohub Binding
- Nest Binding
- Netatmo Binding
- Network Health Binding
- Network UPS Tools Binding
- Nibe Heatpump Binding
- Nikobus Binding
- Novelan/Luxtronic Heatpump Binding
- NTP Binding
- One-Wire Binding
- Onkyo AV Receiver Binding
- Open Energy Monitor Binding
- OpenPaths presence detection binding
- OpenSprinkler Binding
- OSGi Configuration Admin Binding
- Panasonic TV Bindung
- panStamp Binding
- Philips Hue Binding
- Piface Binding
- pilight Binding
- Pioneer-AVR-Binding
- Plex Binding
- Plugwise Binding
- PLCBus Binding
- Primare Binding
- Pulseaudio Binding
- RFXCOM Binding
- RWE Smarthome Binding
- Sager WeatherCaster Binding
- Samsung AC Binding
- Samsung TV Binding
- Serial Binding
- Sallegra Binding
- Satel Alarm Binding
- Sinthesi Sapp Binding
- Snmp Binding
- Somfy URTSI II Binding
- Sonos Binding
- Squeezebox Binding
- Swegon ventilation Binding
- System Info Binding
- TA CMI Binding
- TCP/UDP Binding
- Tellstick Binding
- TinkerForge Binding
- Tivo Binding
- VDR Binding
- Velleman-K8055-Binding
- Wago Binding
- Wake-on-LAN Binding
- Waterkotte EcoTouch Heatpump Binding
- Weather Binding
- Wemo Binding
- Withings Binding
- XBMC Binding
- xPL Binding
- Yamahareceiver Binding
- Zibase Binding
- Z-Wave Binding
- Asterisk
- Google Calendar
- Linux Media Players
- ROS Robot Operating System
- Telldus Tellstick
- Zoneminder
- Wink Hub (rooted)
- Wink Monitoring
- Transformations
- XSLT
- JSON
- REST-API
- Security
- Service Discovery
- Voice Control
- BritishGasHive-Using-Ruby
- Dropbox Bundle
A good source of inspiration and tips from users gathered over the years. Be aware that things may have changed since they were written and some examples might not work correctly.
Please update the wiki if you do come across any out of date information.
- Comfo Air Binding
- Ecobee Examples
- Nest Examples
- Rollershutter Bindings
- Squeezebox
- WAC Binding
- WebSolarLog
- Alarm Clock
- Convert Farenheit to Celcius
- The mother of all lighting rules
- Reusable Rules via Functions
- Combining different Items
- Items, Rules and more Examples of a SmartHome
- Google Map
- Controlling openHAB with Android
- Usecase examples
- B-Control Manager
- Spell checking for foreign languages
- Flic via Tasker
- Chromecast via castnow