Skip to content

CRISP Instrument Details

Kathryn Baker edited this page Mar 11, 2022 · 2 revisions

This page collects information that will be useful for the implementation of the IBEX control system on CRISP.

Background & Timeline

CRISP is a reflectometer instrument at ISIS, on TS1. The CRISP web page describes the background to the instrument.

Control System

CRISP will migrate from the SECI control system to the IBEX control system in MMMMMMMM YYYY.

CRISP Equipment

The equipment listed below is used on CRISP. Please add new information (e.g. new items of equipment, new notes, information about drivers, etc. to this table).

Manufacturer Model Type Connection Driver Notes
ISIS DAE 2 Detector Electronics Ethernet see DAE note
ISIS Mk3 Chopper N/A see Chopper note
GALIL DMC2280 Motion Controller Ethernet EPICS
??? 4-blade jaws see Jaws note
ISIS ??? ISIS Vacuum System see Vacuum System note
Pfeiffer TPG300 Vacuum Gauge RS-232 EPICS see Vacuum System note
Eurotherm Temperature Controller All models at ISIS RS-232 EPICS see Eurotherm note
Oxford Instruments Orange Cryostat Cryogenic System see Oxford Instruments note
Oxford Instruments Blue Cryostat Cryogenic System see Oxford Instruments note
Closed Cycle Refrigerator see CCR note
Julabo FP-50 Water Bath RS-232 see Water Bath note
Julabo FP-52 Water Bath RS-232 see Water Bath note
Grant Instruments ??? Water Bath RS-232 see Water Bath note
Haake N6 Water Bath RS-232 see Water Bath note
Keithley 2000 Multimeter RS-232 see Keithley note
Keithley 2602 Source Meter RS-232 see Keithley note
Hirst GM05 Gaussmeter ??? see Hirst note
Knauer K-6 Electric Valve Drive ??? see Knauer note
Knauer 1050 HPLC pump ??? see Knauer HPLC note
Hitachi L-7100 HPLC pump ??? see Hitachi note
Nima Trough ??? Trough ??? see Nima Trough note
Thurlby EX355P PSU ??? see Thurlby note
Watson Marlow 323 Syringe Pump ??? see Syringe Pumps note
WPI Aladdin-1000 Syringe Pump ??? see Syringe Pumps note
WPI SP2xx Syringe Pump ??? see Syringe Pumps note
??? ??? He3 Monitor ??? see He3 Monitor note

Note: DAE

See multi-detector and single-detector below.

Note: Choppers

CRISP has a Mk3 chopper.

Note: Jaws

Provide information about CRISP jaws.

Note: Vacuum System

TPG300 support is implemented via #216 and #2063

Note: Eurotherm

Eurotherms are used to control temperature Orange Cryostat, CCR and Furnace devices.

Note: Oxford Instruments
  1. Orange Cryostat: models to be determined. Orange cryostats are controlled via a temperature controller (e.g. Eurotherm), so nothing on the cryostat itself for IBEX to control.
  2. Blue Cryostat: models to be determined.

Note: Closed Cycle Refrigerators
  1. CCR is the most frequently used low-temperature device used in on CRISP. CCRs. Not directly computer-controlled - controlled via Eurotherm.

Note: Water Baths

CRISP uses two types of water bath

  1. Julabo (which model(s)?)
  2. Grant Water Bath
    • Update (25-06-2019): Grant water baths are no longer used. No longer any need to support them. See #4457
  3. Haake N6 Water Bath. Haake has now been taken over by ThermoFisher. N6 model may be obsolete. Check existing SECI VI for logic and manual.
    • Update (25-06-2019): Haake water baths are no longer used. No longer any need to support them. See #4456

Note: Keithley
  1. Keithley 2000 Series Multi-Meter. See also #2460.
  2. Keithley 2600 Series Source Meter.

Note: Hirst

Hirst GM05 gaussmeter

Note: Hitachi

Hitachi L-7100 HPLC pump. Can't find L-7100 on Hitachi web-site (may be obsolete). Check existing SECI VI for logic and manual.

Note: Knauer

Knauer K-6 Electric Valve Drive. Knauer web site
K-6 model appears to have been superseded. Check existing SECI VI for logic and manual.

Note: Knauer HPLC

Knauer HPLC 1050 Knauer HPLC 1050 is discontinued.. Check existing SECI VI for logic and manual.

Note: Nima Trough

Nima Trough: SECI used a manufacturer supplied VI. We may need to do the same in IBEX (via lvDCOM).

  • Note: NIMA Technologies Ltd now seems to be part of Biolin Scientific.
  • The NIMA trough is used regularly on SURF. The manufacturer supplied VI is used to view graphs showing information about thin films.
  • The manufacturer has made additional software available for download. A copy of this software is located in \\isis\shares\ISIS_Experiment_Controls\NIMA Trough\Nima_TR8.1.zip.

Note: Thurlby

Thurlby EX355P PSU - see #155 and #198.

Thurlby Thandar Instruments EX355P PSU

Note: Syringe Pumps
  1. Watson Marlow 323 Peristaltic Pump
  2. WPI Aladdin-1000 Syringe Pump
  3. WPI SP2xx Syringe Pump - check specific model.

Note: He3 Monitor

He3 Monitor is an obsolete piece of equipment. It is no longer used. No need to support it.

CRISP SECI Configs

Document information about CRISP SECI configs here.

Configuration Name Sub-Configurations Last Accessed Required
CRISP_place_holder1.conf - dd/mm/yyyy -
CRISP_place_holder2.conf - dd/mm/yyyy -

CRISP Genie Scripts

Similarly, Document information about CRISP SECI Genie scripts here.

CRISP Notes

CRISP has the following specialist panels:

  1. CRISP setup dialogue
  2. CRISP User Front Panel
  3. CRISP analyser stage
  4. INTER High Voltage
  5. SURF Galil analogue output
  6. SURF Galil DIO

CRISP has the following devices under motion control:

  1. goniometer
  2. jaws & height
  3. jaws
  4. multi-detector
  5. single-detector
  6. supermirror
  7. transmission monitor
  8. XYZ stage

CRISP has the following item:

  1. LSS Scan calculator (is this a script?)
Clone this wiki locally