-
Notifications
You must be signed in to change notification settings - Fork 2
Multi galil IOC
In some cases it is necessary for one IOC to talk to multiple galil motor controllers.
For example, this IOC is used for SANS2D, which have a jawset with opposing jaw blades on different galil controllers.
The GALILMUL iocs are configured with ADDR and MTRCTRL macros as for a normal galil. A blank MTRCTRL macro specifies that no controller exists.
The GALILMUL iocs load .cmd files from C:\instrument\settings\config\<machine>\configurations\galilmul, similar to the existing (single) galil controller IOC. The .cmd file it looks for depends on the controller GALILMUL IOC has loaded. If controller 01 and 02 is selected in galilmul configuration then it will look for galilmul01.cmd and galilmul02.cmd files. The same files can be loaded as the usual, single, galil controller (for example jaws.cmd or motorExtensions.cmd).
If multiple GALILMUL iocs are present on a beamline, use a macro guard like $(IFIOC_GALILMUL_01=#) to select the appropriate IOC
IOC macros:
-
GALILADDR1:192.168.x.x -
GALILADDR2:192.168.x.y -
MTRCTRL1:1 -
MTRCTRL2:2
In file C:\Instrument\Settings\config\NDWxxxx\configurations\galilmul\jaws.cmd:
$(IFIOC_GALILMUL_01=#) dbLoadRecords("$(JAWS)/db/jaws.db","P=$(MYPVPREFIX)MOT:,JAWS=JAWS1:,mXN=MTR0101,mXS=MTR0102,mXW=MTR0103,mXE=MTR0201")