Skip to content

SP300 Potentiostat

Jump to bottom Edit New page
John Holt edited this page Sep 27, 2019 · 4 revisions

Wiki > The Backend System > Specific Device IOC > Other > SP300 Potentiostat

Implemented before we documented on the wiki, readme says

You will need a copy of the EC-Lab OEM Development package from http://www.bio-logic.info/potentiostat-electrochemistry-ec-lab/software/oem-package/ to build and use this software The ECLABSDK macro in the Makefile will then need to point to this root

Beside EPICS BASE, the ASYN module is also needed and its location must be added to configure/RELEASE

Note: this driver is still in development, contact [email protected] for further details

https://www.bio-logic.net/softwares/oem-package/

The underlying oem package seems to support these devices so the driver may too:

  • SP50/SP-150/SP-200/SP-240/SP-300,
  • VSP/VSP-300, VMP3/VMP-300,
  • MPG-2 series, HCP-803/HCP-1005

The device supports multiple technique but out driver only support the following (new techniques can be implemented on request):

  • OCV - Open Circuit Voltage technique
  • CA - Chrono-Amperometry technique
  • PEIS - Potentio Electrochemical Impedance Spectroscopy technique
  • CV - Cyclic Voltammetry technique
  • LASV -
  • LOOP - Loop technique
  • TO - Trigger Out technique
  • TI - Trigger In technique
  • TOS - Trigger Out Set technique
  • VSTEP -
  • DURSTEP -

Unsupported techniques

  • Cyclic Voltammetry Advanced technique
  • Chrono-Potentiometry technique
  • Voltage Scan technique
  • Current Scan technique
  • Constant Power technique
  • Constant Load technique
  • Staircase Potentio Electrochemical Impedance Spectroscopy technique
  • Galvano Electrochemical Impedance Spectroscopy technique
  • Staircase Galvano Electrochemical Impedance Spectroscopy technique
  • Differential Pulse Voltammetry technique
  • Square Wave Voltammetry technique
  • Normal Pulse Voltammetry technique
  • Reverse Normal Pulse Voltammetry technique
  • Differential Normal Pulse Voltammetry technique
  • Differential Pulse Amperometry technique
  • Ecorr. Vs Time technique
  • Linear Polarization technique
  • Generalized Corrosion technique
  • Cyclic PotentioDynamic Polarization technique
  • PotentioDynamic Pitting technique
  • PotentioStatic Pitting technique
  • Zero Resistance Ammeter technique
  • Manual IR technique
  • IR Determination with PotentioStatic Impedance technique
  • IR Determination with GalvanoStatic Impedance technique
Add a custom footer
Add a custom sidebar
Clone this wiki locally